|
OST-045: 5AGTE... again ;)
|
|
01-18-2018, 12:46 AM
Post: #1
|
|||
|
|||
OST-045: 5AGTE... again ;)
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/ost-045.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") As arrived. The head has been cleaned, but I don't know if it has also be pressure tested, so I'll be sending it out, along with all the associated bits to get cleaned and pressure checked before I start work. ![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/head_unpacked.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") The buckets and shims have seen better days... replacing them with good used units is far less costly then trying to salvage these More to come....... 
Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
01-19-2018, 07:57 PM
Post: #2
|
|||
|
|||
|
OST-045: 5AGTE... again ;)
work begins.... de-burring the casting......
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/cleanup_casting_2_panel.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") more to come......
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
01-23-2018, 04:20 AM
Post: #3
|
|||
|
|||
OST-045: 5AGTE... again ;)
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/intake_4_done_vs_3_untouched.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") working the first set of bowls and seats..... more to come.......
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
01-25-2018, 02:03 AM
Post: #4
|
|||
|
|||
|
OST-045: 5AGTE... again ;)
2 down.... 2 to go....
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/intake_2_panel.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") more to come......
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
01-26-2018, 08:33 PM
Post: #5
|
|||
|
|||
|
OST-045: 5AGTE... again ;)
Just about done on the intake side.........
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/intake_3_panel.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") more to come.....
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
01-27-2018, 02:41 AM
Post: #6
|
|||
|
|||
OST-045: 5AGTE... again ;)
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/intake_4_panel.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") next... the exhaust side.... more to come........
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
02-01-2018, 12:05 AM
(This post was last modified: 02-01-2018 12:15 AM by oldeskewltoy.)
Post: #7
|
|||
|
|||
OST-045: 5AGTE... again ;)
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/2_chamers_down__2_panel_annoted.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") Chamber work has begun..... more to come.......
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
02-05-2018, 10:51 PM
Post: #8
|
|||
|
|||
|
OST-045: 5AGTE... again ;)
3 chambers down......
![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/3_chambers_down2C_one_to_go.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") sometimes the right tool is the simplest.... working the chamber wall with 120 grit.  ![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/hand_working_the_chamber_smaller.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") more to come....
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
02-08-2018, 05:51 PM
Post: #9
|
|||
|
|||
|
OST-045: 5AGTE... again ;)
Chambers done...... (for now)
work begins on the exhaust side.... one done... one under construction ![[Image: AEU86 AE86 - OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/one_done2C_one_under_construction.jpg "AEU86 AE86 - OST-045: 5AGTE... again ;)") more to come......
Dan - You can | .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
|
02-09-2018, 02:11 PM
Post: #10
|
|||
|
|||
|
OST-045: 5AGTE... again ;)
Dan
Have you send any dyno testing that would indicate that the 4AGE would see favorable power gains by incorporating anti-reversion step in the exhaust port - header. I've already increased the exhaust port by about 3mm, but was thinking about grinding out the header I.D. at the head attachment face. Dave W |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| (Catching up) OST-086 MM: Built for Mario | oldeskewltoy | 2 | 3,547 |
10-28-2022 08:23 AM Last Post: decryphe |
|
| OST-093: My, My, Mystery | oldeskewltoy | 10 | 7,149 |
09-18-2022 02:19 AM Last Post: oldeskewltoy |
|
| (Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams | oldeskewltoy | 5 | 4,863 |
09-09-2022 09:07 PM Last Post: Vaptor |
|
| (Catching up...) OST-083: Salvage operation | oldeskewltoy | 2 | 3,160 |
07-11-2022 08:32 PM Last Post: banpei |
|
| (Catching up...) OST-082: Nope, never again... at least not without all the parts | oldeskewltoy | 0 | 2,543 |
06-28-2022 09:17 PM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)