Kajoba Works *E7 & AE86 weld-in chassis braces
03-09-2015, 03:25 PM (This post was last modified: 12-05-2017 01:19 PM by kjb.)
Post: #1
Kajoba Works *E7 & AE86 weld-in chassis braces
I've had these available for a while now, might as well put them on for public sale!

[Image: AEU86 AE86 - Kajoba Works *E7 & AE86...sis braces]
[Image: AEU86 AE86 - Kajoba Works *E7 & AE86...sis braces]
1.5mm steel, easy to weld. Made in Finland!

The smaller ones are for joining the front chassis leg to the firewall, preventing the cracking and buckling that happens on cars that see large twisting forces on the chassis.

The larger ones are for strengthening the rear shock absorber upper mount. If you're going to use coilovers at the back, these do a nice job reinforcing the mount area and spreading the loads.

PLEASE NOTE! These were designed for LHD cars. The rear ones are more than likely going to fit RHD cars as well, but the front pieces fit exactly to the shapes of the front chassis legs and firewall. RHD firewall shape might differ and unfortunately I don't have access to RHD cars to confirm this Sad

Out of stock for the time being, will update when these are available again.

Kajoba Works / Kaj Barck
[email protected]
http://www.kajobaworks.com
Visit this user's website Find all posts by this user
03-09-2015, 06:25 PM
Post: #2
Kajoba Works *E7 & AE86 weld-in chassis braces
Got any pics of them installed?

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user
03-12-2015, 11:54 AM
Post: #3
Kajoba Works *E7 & AE86 weld-in chassis braces
You have my attention......
I will have to check for any clearance issues with the new engine set-up for the manifold/chassis leg but strongly consider the need for these!
Find all posts by this user
03-22-2015, 04:31 PM
Post: #4
Kajoba Works *E7 & AE86 weld-in chassis braces
I updated the first post with a few quick photos showing where the brackets are meant to be installed, I hope this clears things up Smile
Also, due to the Finnish Post being the greedy bastard that it is, I had to raise the EU shipping price a bit, sorry about that Sad
Visit this user's website Find all posts by this user
11-01-2015, 06:21 PM
Post: #5
Kajoba Works *E7 & AE86 weld-in chassis braces
Are these still available? Smile
Find all posts by this user
11-03-2015, 03:40 AM
Post: #6
Kajoba Works *E7 & AE86 weld-in chassis braces
(11-01-2015 06:21 PM)krullibull Wrote:  Are these still available? Smile

Yup still available Smile
Visit this user's website Find all posts by this user
12-06-2015, 02:59 PM
Post: #7
Kajoba Works *E7 & AE86 weld-in chassis braces
I would need a set for all four of them for my LHD AE86.

Can you send a paypal invoice to [email protected] ?

1986 Toyota Corolla AE86 Levin Kouki Coupe Panda White/Black
2002 Toyota MR2/MR-S T-Sport Blue Mica
Find all posts by this user
12-09-2015, 08:43 AM
Post: #8
Kajoba Works *E7 & AE86 weld-in chassis braces
(12-06-2015 02:59 PM)asyrigos Wrote:  I would need a set for all four of them for my LHD AE86.

Can you send a paypal invoice to [email protected] ?

E-mail sent Smile

Sorry for the delay, for some reason I didn't receive any notifications for the reply. I re-subscribed to this thread so hopefully that prevents this happening in the future.
Visit this user's website Find all posts by this user
12-11-2015, 11:41 AM
Post: #9
Kajoba Works *E7 & AE86 weld-in chassis braces
Do these work for RHD?
Is the bulkhead the same as LHD but mirrored or is it the same bulkhead?
Find all posts by this user
12-11-2015, 05:41 PM
Post: #10
Kajoba Works *E7 & AE86 weld-in chassis braces
(12-11-2015 11:41 AM)mad.matt Wrote:  Do these work for RHD?
Is the bulkhead the same as LHD but mirrored or is it the same bulkhead?

Unfortunately I don't have access to a RHD Corolla so it's unknown at the moment. Could you take a few photos of the front chassis leg -> firewall corner from both sides, maybe that'll clear things up Smile

You can post them here or email me: [email protected]
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Kajoba Works 4A-GE 16V dual-plenum intake manifolds kjb 2 10,469 08-20-2015 07:00 PM
Last Post: corolla4agze
  K1 MOTOR WORKS KOUKI LEVIN FRONT HEADLIGHT SET **COMPLETE** yversion 9 9,684 07-01-2011 02:27 AM
Last Post: yversion
  K1 MOTOR WORKS SWIFT FRONT SPRINGS 8KG yversion 1 3,878 05-17-2011 12:12 AM
Last Post: yversion
  Last Week 25% Off All Cusco Products For All Toyota Chassis Spirits Racing 22 16,259 05-12-2011 11:34 PM
Last Post: Spirits Racing
  Groupbuy Ultra Racing Chassis Braces S-Tuning 9 6,794 12-01-2009 04:48 PM
Last Post: S-Tuning

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication