Fitting a TRD/CBY N2 front lip
03-23-2011, 09:59 PM
Post: #1
Fitting a TRD/CBY N2 front lip
Hi guys

I just bought a TRD/CBY style N2 fronlip from MCNSports, but when I tryed to fit it on my Zenki bumper, it has a 10mm gab between bumper and lip in the corners. Confused

The question is, how high it should be mounted on the bumper?
Does anyone have some closeup pics or some messurements?

If I should mount it higher, I will need to cut holes in the bumper, for the airducts Huh

Project AE86 now begun.

Cars I have owned:
Toyota Starlet EP91 1,3 16v Turbo, 200hp
Toyota Starlet EP71 1,3 12v Sport
Mercedes 207D camper, 1977.
Toyota Starlet EP70 with a 174hp Silvertop 20v See video here:
http://videos.streetfire.net/search/Star...079edc.htm
Toyota Corolla AE101 with a 164hp Silvertop 20v. (Evolution bodykit and candycolor paint).
Volvo 240 2,1 (The only car I have maked money on).
Toyota Corolla EE90 (my first car)
Find all posts by this user
03-24-2011, 12:22 AM
Post: #2
Fitting a TRD/CBY N2 front lip
Isn't the TRD lip supposed to go with the TRD widebody? They meet the widened fenders, not the stock ones.

A wheel to steer the front of the car
A pedal to steer the rear
Find all posts by this user
03-24-2011, 07:57 PM
Post: #3
Fitting a TRD/CBY N2 front lip
Well, not the CBY one, but if you buy the original TRD, it only fit with flares.

I will try to take some pics to better explaine the problem.[/img]

Project AE86 now begun.

Cars I have owned:
Toyota Starlet EP91 1,3 16v Turbo, 200hp
Toyota Starlet EP71 1,3 12v Sport
Mercedes 207D camper, 1977.
Toyota Starlet EP70 with a 174hp Silvertop 20v See video here:
http://videos.streetfire.net/search/Star...079edc.htm
Toyota Corolla AE101 with a 164hp Silvertop 20v. (Evolution bodykit and candycolor paint).
Volvo 240 2,1 (The only car I have maked money on).
Toyota Corolla EE90 (my first car)
Find all posts by this user
03-29-2011, 01:01 PM
Post: #4
Fitting a TRD/CBY N2 front lip
i know your problem, yes you will have to cut slots out of your bumper to allow duct to pass. if you dont want to cut your bumper you could cut the duct back so it passes the bumper bottom. If you dont do either of these the lip will point downwards. I didnt get mine from mcnsport but mine is 10/20mm too big as well but when you actually start fitting it, it will come in also you can fit a longer bumper support bar and push the bumper corners out to meet it. hope that helps
Find all posts by this user
03-29-2011, 07:32 PM
Post: #5
Fitting a TRD/CBY N2 front lip
Thanks man. Can you do me a favour, and show me a closeup pics? Or messure the distance here? I will really appreciate it

[Image: AEU86 AE86 - Fitting a TRD/CBY N2 front lip]

Project AE86 now begun.

Cars I have owned:
Toyota Starlet EP91 1,3 16v Turbo, 200hp
Toyota Starlet EP71 1,3 12v Sport
Mercedes 207D camper, 1977.
Toyota Starlet EP70 with a 174hp Silvertop 20v See video here:
http://videos.streetfire.net/search/Star...079edc.htm
Toyota Corolla AE101 with a 164hp Silvertop 20v. (Evolution bodykit and candycolor paint).
Volvo 240 2,1 (The only car I have maked money on).
Toyota Corolla EE90 (my first car)
Find all posts by this user
03-30-2011, 01:38 PM
Post: #6
Fitting a TRD/CBY N2 front lip
no problem i will do that tonight BUT i am fitting a TRD kit so i HAD to cut slots in the bumper in order to line with the arches/kit properly but you are not fitting that kit so you might get away without cutting the slots? i wouldnt go cutting the bumper if its in good condition when you dont need to?
Find all posts by this user
03-30-2011, 07:29 PM
Post: #7
Fitting a TRD/CBY N2 front lip
Maurice Wrote:i wouldnt go cutting the bumper if its in good condition when you dont need to?

Exactly, my bumper is in MINT condition Smile

Project AE86 now begun.

Cars I have owned:
Toyota Starlet EP91 1,3 16v Turbo, 200hp
Toyota Starlet EP71 1,3 12v Sport
Mercedes 207D camper, 1977.
Toyota Starlet EP70 with a 174hp Silvertop 20v See video here:
http://videos.streetfire.net/search/Star...079edc.htm
Toyota Corolla AE101 with a 164hp Silvertop 20v. (Evolution bodykit and candycolor paint).
Volvo 240 2,1 (The only car I have maked money on).
Toyota Corolla EE90 (my first car)
Find all posts by this user
03-30-2011, 07:50 PM
Post: #8
Fitting a TRD/CBY N2 front lip
Fitted up my TRD kit without cutting any of the front bumper away . ??

[Image: AEU86 AE86 - Fitting a TRD/CBY N2 front lip]

Your addiction to motorsport can only be cured by poverty !!
Find all posts by this user
03-30-2011, 08:34 PM
Post: #9
Fitting a TRD/CBY N2 front lip
nzae86 Wrote:Fitted up my TRD kit without cutting any of the front bumper away . ??

I have seen alot on your picture, but I can't se how high you have mounted it. Undecided When I fit it without cutting, it have some huge gabs all way around. Mayby I should just fill it with resin and fiberglass :wink:

Project AE86 now begun.

Cars I have owned:
Toyota Starlet EP91 1,3 16v Turbo, 200hp
Toyota Starlet EP71 1,3 12v Sport
Mercedes 207D camper, 1977.
Toyota Starlet EP70 with a 174hp Silvertop 20v See video here:
http://videos.streetfire.net/search/Star...079edc.htm
Toyota Corolla AE101 with a 164hp Silvertop 20v. (Evolution bodykit and candycolor paint).
Volvo 240 2,1 (The only car I have maked money on).
Toyota Corolla EE90 (my first car)
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Fitting Air Con (No PS) to LHD AE86 pack 7 3,058 01-07-2024 11:36 AM
Last Post: CCB
  Fitting Fibreglass Kouki Lip? chrisae86 3 1,570 02-25-2022 08:14 PM
Last Post: chrisae86
  Fitting driftworks CS2 coilovers bozu 2 4,220 05-30-2017 10:50 AM
Last Post: bozu
  goodridge SS brake lines fitting doubts wouter86 17 15,481 04-30-2014 06:33 PM
Last Post: wouter86
  Flywheel fitting totta Crolla 11 11,679 11-24-2013 05:31 PM
Last Post: Apsogos

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication