Aram's 3SGE Beams Levin Coupe

[Kid Karola]

Aram Wrote:Added the heater barb:


Sensor flange:

Nicely intergrated sensors

[Aram]

Hi Adam,

Thanks for the kind words!
As soon as I can I will take some pictures for you!

Looking forward to see your topic on the rebuild of your car!


@Kid,

Thanks!
I hope I can acutually make those soon, my milling machine is not ready to accept dxf files yet....

[Aram]

Small update,

I put the steering house back together, it's got the quaife quick rack inside. :-)







I also made a beginning with the coolant bypass block for the blacktop:







And I also moved the chassis to a different location for the final touches before sandblasting.
At this location I can work more often than the other, plus it has hetaing and lots of tools.
More news on that later. :-)

[Aram]

Today I removed the kit from the bottom.
Almost everything because I had to stop, neighbours were complaining about the noise my tool made.










Also started on some more rust removal:

[Aram]

Moving along:

[cannabolic]

moving forward

great! Waiting for more progress and pics!

[Kid Karola]

Are you making a corresponding groove in the head for the O-ring seal?

[Aram]

Thanks Phillip!



@Kid,

There is no need to do that, it should work like this.
I ordered a viton gasket today.

And because I'm quite proud of it a few more pics of the almost finished product.
Only the sensor and barb holes need to be made.

[jasper]

zozo dat kendiewel

[Aram]

Yesterday and today we did the last rust patches and made some chassis reinforcements.
Tommorow the final touches and Saturday it's going to the sandblaster, finaly some progress!!










Reinforcements: