what do you use like suspensions ?

Threaded Mode | Linear Mode

what do you use like suspensions ?

09-29-2006, 03:40 PM

Post: #23

NoHachi Offline

Super Moderator

Posts: 2,902
Joined: Sep 2004
Reputation: 0

Mux is right..I was talking about the 2kg/mm type springs..Fine if you like stock and need an upgrade, but I personally wouldn't bother..just an opinion.

Koni shocks are just fine..could do with better damping curves (LOTS of hysterisis) and a bit more compression damping vs rebound. Billsteins have the higher compression damping but the non-adjustables are valved to stiff. They are a higher quality shock too.

You have to remember that even the stock koni's were valved to suit stock springs on the original car. The adjustment only influences rebound damping so you are stuck with the compression valving.

Probably the HTS ones are valved for uprated spings and have adjustment for both bump and rebound at the same time. But haven't seen any shockdyno curves of those..

A wheel to steer the front of the car
A pedal to steer the rear

« Next Oldest | Next Newest »

Messages In This Thread

what do you use like suspensions ? - Spy - 09-27-2006, 08:29 PM

[] - Mux213 - 09-27-2006, 09:37 PM

[] - NoHachi - 09-27-2006, 10:40 PM

[] - Ivan141 - 09-27-2006, 10:47 PM

[] - NoHachi - 09-27-2006, 10:55 PM

[] - Mux213 - 09-27-2006, 11:17 PM

[] - kungfumaster - 09-28-2006, 12:30 PM

[] - Mux213 - 09-28-2006, 12:51 PM

[] - NoHachi - 09-28-2006, 02:45 PM

[] - Mux213 - 09-28-2006, 02:52 PM

[] - NoHachi - 09-28-2006, 03:06 PM

[] - Mux213 - 09-28-2006, 03:14 PM

[] - mr monster - 09-29-2006, 12:50 AM

[] - Mux213 - 09-29-2006, 08:27 AM

in addition to the nice write up :) - cj - 09-29-2006, 11:01 AM

[] - Mux213 - 09-29-2006, 11:17 AM

[] - mr monster - 09-29-2006, 11:48 AM

[] - jamiemirror - 09-29-2006, 11:59 AM

[] - Holli - 09-29-2006, 12:07 PM

[] - mr monster - 09-29-2006, 12:13 PM

[] - Mux213 - 09-29-2006, 12:16 PM

[] - Mux213 - 09-29-2006, 12:17 PM

[] - NoHachi - 09-29-2006 03:40 PM

[] - Holli - 09-29-2006, 04:34 PM

[] - Mux213 - 09-29-2006, 05:01 PM

[] - Holli - 09-30-2006, 08:47 AM

[] - Spy - 09-30-2006, 11:59 AM

[] - Mux213 - 09-30-2006, 12:45 PM

[] - Spy - 10-01-2006, 01:39 PM

[] - SutteR - 10-01-2006, 03:01 PM

[] - Spy - 10-01-2006, 03:33 PM

[] - Mux213 - 10-01-2006, 04:19 PM

[] - mrgud - 10-01-2006, 04:46 PM

[] - Mux213 - 10-01-2006, 06:01 PM

[] - Apolan - 10-14-2006, 01:58 AM

[] - szczursk - 03-25-2009, 08:40 PM

[] - Jan Pedersen - 03-26-2009, 08:40 AM

[] - szczursk - 03-26-2009, 08:11 PM

[] - joker12 - 03-27-2009, 03:37 PM

[] - Uzelac - 04-14-2009, 10:20 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Which threadsize to use for the vdo oil temp sensor?	ditn	8	10,400	03-15-2012 01:56 AM Last Post: Project D
	why do you use "roll center ajuster"?	leckter	15	16,997	02-07-2012 07:04 PM Last Post: Bean
	What's the LSD oil I should use?	heshan	5	5,892	07-25-2011 08:13 PM Last Post: heshan
	Has anyone used an aftermarket coil like MSD blaster?	JDMitch	6	8,225	09-06-2010 06:14 PM Last Post: Red
	Use LocTite on Bolts ?????	juantonwan	2	3,575	05-22-2010 05:30 PM Last Post: Eric

User(s) browsing this thread: 1 Guest(s)