|
Flywheel Weight
|
|
06-22-2007, 09:51 AM
Post: #1
|
|||
|
|||
|
Flywheel Weight
Ok so last night I started changing my clutch. Everything is off: Gearbox, prop shaft and clutch housing. And I come face to face with a gorgeous flywheel that I really feel like keeping. The only problem is, the flywheel is 200mm and the clutch I have chosen is 212mm and a flywheel from a 20V. I'm guessing the flywheel for the 20v is about 5kg and the flywheel on the car is about 3.6kg. Is there any way to reduce the weight of the flywheel from the 20V to match or come close to the 200mm flywheel? or should I just buy a lightweight 212mm flywheel and sell the 200mm one?
I can't finish changing the clutch until I get a new pilot bearing anyway, so if anyone has one, or knows where the quickest place to get one is. Then let me know 
|
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Flywheel Weight - Jezza_hr - 06-22-2007 09:51 AM
[] - assassin10000 - 06-23-2007, 08:12 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| AE86 rear axle weight | megabob | 11 | 20,161 |
03-29-2024 11:18 AM Last Post: FanIsHere |
|
| light weight Flywheel | filh | 9 | 7,956 |
02-05-2018 05:20 PM Last Post: filh |
|
| crank 6 bolt flywheel | DJexor | 5 | 8,580 |
12-05-2016 08:21 AM Last Post: d3nso |
|
| Flywheel fitting | totta Crolla | 11 | 13,488 |
11-24-2013 05:31 PM Last Post: Apsogos |
|
| Steering column weight savings? | 4000GT | 4 | 5,860 |
09-20-2012 08:40 PM Last Post: 4000GT |
|
User(s) browsing this thread: 1 Guest(s)