Krullibulls Ae86 BEAMS is the only way

[krullibull]

Some more vacation jobs.



3D-printed a cover for the positive side of the battery.

I also jacked up the car to do a check of the underside, some small things to do: Reset the pinion angle, cut some more of the webbing on top of the gearbox and make a skidplate for the engine as I had already rubbed it slightly





I may have made the skidplate a bit too heavy duty. It's made of 40mmx40mmx4mm angle iron, 22mmx3mm pipes and ~1.5-2mm stainless plate.





The car got a bit low though but I've only lowered the ground clearance ~10mm. I'll see how this works out, it it doesn't I'll modify the sump or go drysump.

// Johan