Strange ignition problem

[kpretro84]

Okay here it goes i left the car for a week it was running great... after that week i try to start the car it wont fire this is whats happening:

igniter is getting hot so are the wires going to it and from it i see smoke after a few cranks from the wires.

when i crank the engine its struggling like the battery is dead unless i unplud the HT lead that goes from the coil to dizzy the crank speed increase?? yes there is spark if the engine starts it dies straight away.

this is what ive tried:

changed coil changed igniter changed the HT Leads looked everywhere for a short somewhere? nothing? used another car to jump start so i had heaps of tries. when i try crank with ht leads thats slowing down cranking wires still get hot and smoke ecu is fine not getting hot or smoking or smelling like fried??? and ive tried a different one as well. even changed spark plugs.

What i think the ignition side of things isnt wired correctly?

on the igniter the white wire is cut off does anyone know the ignitor pinouts/what each wire is for? il just re wire the ignition go from there

on the picture i have red white brown yellow black

please some one tell me where these wires go and what they re for or some info how the ignition suppose to be wired?

pretty please