OST-013: Massaging a virgin ;)

Threaded Mode | Linear Mode

OST-013: Massaging a virgin ;)

09-08-2011, 06:21 PM

Post: #31

oldeskewltoy Offline

4AG Super Genius ;)

Posts: 1,829
Joined: Jan 2007
Reputation: 1

Project D Wrote:port matching with the exhaust gasket, clean the mismatched seat and removed all the casting I presume

Look carefully... is it gasket matched? If it is, why is there not a perfect match??? Confused

Part of what is difficult to see (I tried) is deep in the port, just before the bowl, the port wall has been tapered. The taper is begun back in the bowl, and is brought forward into the port.

In the left view/bottom, if you look below the guide(roof of port), you see no shadow lines, now look at the right hand view same area. This is a key area because the flow is already in transition from vertical flow to horizontal flow when it "hits" the intruding port wall and is forced to merge with the gasses coming from the 2nd valve(out of view). By tapering the port to the bowl, the merge is far smoother, the actual merge point is larger, and occurs mostly AFTER the transition point from vertical to horizontal flow.

Dan -

You can | Sad

.... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991

« Next Oldest | Next Newest »

Messages In This Thread

OST-013: Massaging a virgin ;) - oldeskewltoy - 08-18-2011, 02:35 AM

[] - Bean - 08-18-2011, 07:35 AM

[] - banpei - 08-18-2011, 10:26 PM

[] - Bean - 08-18-2011, 11:27 PM

[] - oldeskewltoy - 08-20-2011, 02:55 AM

[] - oldeskewltoy - 08-20-2011, 07:16 PM

[] - oldeskewltoy - 08-21-2011, 12:01 AM

[] - oldeskewltoy - 08-23-2011, 01:37 AM

[] - Project D - 08-23-2011, 01:51 AM

[] - oldeskewltoy - 08-23-2011, 02:22 AM

[] - oldeskewltoy - 08-26-2011, 03:31 AM

[] - NoHachi - 08-26-2011, 10:22 AM

[] - Bean - 08-26-2011, 02:30 PM

[] - Project D - 08-26-2011, 03:44 PM

[] - oldeskewltoy - 08-30-2011, 06:57 PM

[] - Project D - 08-30-2011, 09:01 PM

[] - Bean - 08-30-2011, 09:07 PM

[] - oldeskewltoy - 08-31-2011, 02:18 AM

[] - Project D - 08-31-2011, 04:00 AM

[] - oldeskewltoy - 09-03-2011, 01:36 AM

[] - NoHachi - 09-03-2011, 11:52 AM

[] - oldeskewltoy - 09-03-2011, 07:43 PM

[] - NoHachi - 09-04-2011, 12:20 PM

[] - Bean - 09-04-2011, 02:01 PM

[] - oldeskewltoy - 09-04-2011, 06:44 PM

[] - oldeskewltoy - 09-04-2011, 06:48 PM

[] - Bean - 09-04-2011, 06:52 PM

[] - oldeskewltoy - 09-04-2011, 06:54 PM

[] - oldeskewltoy - 09-07-2011, 10:44 PM

[] - Project D - 09-08-2011, 03:46 AM

[] - oldeskewltoy - 09-08-2011 06:21 PM

[] - Project D - 09-09-2011, 06:46 AM

[] - oldeskewltoy - 09-09-2011, 06:44 PM

[] - oldeskewltoy - 09-09-2011, 06:58 PM

[] - oldeskewltoy - 09-09-2011, 07:11 PM

[] - Project D - 09-09-2011, 08:30 PM

[] - oldeskewltoy - 09-10-2011, 01:35 AM

[] - oldeskewltoy - 09-12-2011, 10:22 PM

[] - oldeskewltoy - 09-12-2011, 10:28 PM

[] - Project D - 09-13-2011, 04:10 AM

[] - oldeskewltoy - 09-13-2011, 06:10 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	(Catching up) OST-086 MM: Built for Mario	oldeskewltoy	2	2,784	10-28-2022 08:23 AM Last Post: decryphe
	OST-093: My, My, Mystery	oldeskewltoy	10	5,568	09-18-2022 02:19 AM Last Post: oldeskewltoy
	(Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams	oldeskewltoy	5	3,693	09-09-2022 09:07 PM Last Post: Vaptor
	(Catching up...) OST-083: Salvage operation	oldeskewltoy	2	2,376	07-11-2022 08:32 PM Last Post: banpei
	(Catching up...) OST-082: Nope, never again... at least not without all the parts	oldeskewltoy	0	1,882	06-28-2022 09:17 PM Last Post: oldeskewltoy

User(s) browsing this thread: 1 Guest(s)