[4AGE] ignition timing problem -> SOLVED !!
05-15-2011, 07:14 PM
Post: #9
 
if there is no change with the diagnostic plug try setting timing at idle (engine warm etc...) to 16° - I doubt this will fix everything but at least one thing less to worry about.

AE86 ex-daily
Visit this user's website Find all posts by this user


Messages In This Thread
[] - eg6maxx - 05-15-2011, 05:31 PM
[] - Bean - 05-15-2011, 06:03 PM
[] - eg6maxx - 05-15-2011, 06:26 PM
[] - Bean - 05-15-2011, 06:31 PM
[] - fax0815 - 05-15-2011, 06:33 PM
[] - Ivan141 - 05-15-2011, 06:36 PM
[] - eg6maxx - 05-15-2011, 06:52 PM
[] - Bean - 05-15-2011 07:14 PM
[] - fax0815 - 05-15-2011, 07:21 PM
[] - jondee86 - 05-16-2011, 02:29 AM
[] - eg6maxx - 05-16-2011, 04:01 PM
[] - fax0815 - 05-16-2011, 07:22 PM
[] - jondee86 - 05-17-2011, 12:12 AM
[] - eg6maxx - 05-17-2011, 11:48 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Ignition switch plug and wires Blaze0010 3 1,522 11-25-2024 12:29 PM
Last Post: Blaze0010
  AE86 Driveshaft too long? [SOLVED] MyCrazyGarage 12 10,197 07-28-2022 10:48 PM
Last Post: banpei
  20v Silvertop stock ignition timing and fueling maps Lykowsky 5 15,455 07-18-2019 03:52 PM
Last Post: oldeskewltoy
  4agze timing leon205gti 11 15,648 04-07-2017 03:10 AM
Last Post: jondee86
  Toda timing info - with good general 4AG timing info too oldeskewltoy 0 5,899 11-05-2016 01:34 AM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication