ECU - MAP or AFM version?

[Striker]

Offcourse you can tell, which one it is, the problem is you can hardly tell by the number on top if it is AFM or MAP, then there's another problem to do with the ignition system, will it use ESA or VAST. you also can't tell by the number on the ecu (IMHO not for sure anyway)

BUT at the pins on the ecu board are letters, each pin has a combination which shows what input or output the pin on the ecu is.

Look for the terms VCC and PIM these are the MAP sensors ecu inputs, so if these terms are printed on the circuitboard (at the 18pin connector) you,ve got a MAP one
If these terms aren't printed on the circuitboard look for the terms VS and VC (at the 14pin connector) if these are there you're dealing with a AFM ecu.

for details about the various ECU's look here
http://toymods.org.au/Repository/TechDoc.../fi_31.jpg
and here
http://venixjr.student.utwente.nl/thomas...CU_pinouts

regards Thomas