|
Ford Gearbox experience
|
|
03-30-2009, 05:59 PM
Post: #2
|
|||
|
|||
|
RS2000 4 speed gearbox will fit the Fensport (RM sport) bellhousing. Type 9 will also fit but the gearchange isn't quite as nice as the 4 speed and the 4 speed ratios are better IMHO.
I use a standard AE86 type clutch cover with a MGB clutch plate (200mm) AE86 release bearing with the carrier bored out to suit the type 9 You will need to change the spigot bearing in the end of the crank also. A gearbox mount is easily fabricated using the AE86 mount modded to use the ford rubber. Then it's just the propshaft. If you use the 4 speed gearbox no mods to the gearbox tunnel are needed, the 5 speed 'box is just a little too long for the original gear lever hole. hth, TC An analogue brain in a digital World |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Ford Gearbox experience - Eircamae86 - 03-30-2009, 06:33 AM
[] - totta Crolla - 03-30-2009 05:59 PM
[] - Eircamae86 - 03-30-2009, 07:48 PM
[] - totta Crolla - 03-30-2009, 08:00 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Ford gearbox | totta Crolla | 0 | 2,011 |
02-15-2022 05:21 PM Last Post: totta Crolla |
|
| ford type 9 gearbox with 4age engine | filh | 29 | 54,836 |
01-11-2015 01:02 PM Last Post: filh |
|
| Has anyone had any experience transplanting roof skins? | Jezza_hr | 27 | 28,560 |
01-13-2013 11:46 AM Last Post: Vaptor |
|
| 4A-GE first experience | DRFT | 8 | 12,798 |
05-04-2012 01:51 AM Last Post: oldeskewltoy |
|
| experience w55 gearbox | Erik_dk | 4 | 6,398 |
09-09-2008 08:18 AM Last Post: Dimitri |
|
User(s) browsing this thread: 1 Guest(s)