cannabolics hachi...
07-03-2009, 11:27 AM
Post: #51
cannabolics hachi...
i tak patrze ze wszyscy co maja ae sa z wroclawia Tongue
Find all posts by this user
07-03-2009, 01:06 PM
Post: #52
cannabolics hachi...
doggy Wrote:Just one question - why spot weld like you do, and not 2cm weld - 2cm gap? Its more efficient this way?

There are some factors saying it would be better if I spot weld this. Firstly, it's a very thin plate and I tend to make holes. Like I've mentioned, I dunno if the reason is my welding equipment, which is rather an unsophisticated or the more realistic reason, my skills Cool

I could go on saying that beams tend to crack along the whole length and spot welding makes it "safer", but like you said, I think it's more efficient with 2 cm beams...

lochun Wrote:i tak patrze ze wszyscy co maja ae sa z wroclawia Puh

Yeah, I think most Polish AE86 are in Wroclaw/Breslau.

Let's keep this topic in English ----> rules Dumb question

Philip
Find all posts by this user
07-03-2009, 03:56 PM
Post: #53
cannabolics hachi...
not in all case
sometimes is beter to weld like you
Find all posts by this user
08-08-2009, 07:43 PM
Post: #54
cannabolics hachi...
Mini update Smile

[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]

Philip
Find all posts by this user
08-08-2009, 10:05 PM
Post: #55
cannabolics hachi...
now i see that your car have a lot of rust. it is like cheese Tongue heh.
Find all posts by this user
08-09-2009, 01:07 AM
Post: #56
cannabolics hachi...
The funny about this is, that I've seen a lot of other hachi-rokus and I consider mine to notBig Grin be a very rusty one Smile

Philip
Find all posts by this user
08-10-2009, 11:52 AM
Post: #57
cannabolics hachi...
you havent luck Tongue can, what are you going to do with engine when you done the body? Tongue oh, in what colour you want to paint your hachi??
Find all posts by this user
08-10-2009, 12:03 PM
Post: #58
cannabolics hachi...
respect for this project!! Thumbs up!

http://bruutt.blogspot.nl/
Projects: Lancer evo 4 rs, ae86 drifter, carina ta60 4a-ge & ae82gt twin cam..
Find all posts by this user
08-10-2009, 05:39 PM
Post: #59
cannabolics hachi...
lochun Wrote:you havent luck Tongue can, what are you going to do with engine when you done the body? Tongue oh, in what colour you want to paint your hachi??

A have a small port which I'm going to mod. It's going to be a AE92, AE101 and AE111 comboSmile
But that's way in the future

einneb Wrote:respect for this project!! Thumbs up!


Thanks man Smile

Philip
Find all posts by this user
08-10-2009, 08:25 PM
Post: #60
cannabolics hachi...
time for another mini update

Had a lot of troubles with the right spring nest. It didn't come of as easy as on the other side, so it got a little bit dent. luckily with a lot of small welds, banging, grips and pins I manage to get it right in place again.Of course primed and cleaned Smile

before welding it in place I spot welded some
[Image: AEU86 AE86 - cannabolics hachi...]
the nest
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]

I also cut the pocket out
[Image: AEU86 AE86 - cannabolics hachi...]
finished spot welding inside
[Image: AEU86 AE86 - cannabolics hachi...]
[Image: AEU86 AE86 - cannabolics hachi...]

jeyoo Cool

Philip
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication