|
no ignition on ae86
|
|
12-21-2007, 12:47 AM
Post: #6
|
|||
|
|||
|
The unit the ignitor sits on = the ignition coil if I'm not mistaken. It should have a permanent connection to +12V on one end(+), and the signal wire on the other(-).
So that would mean you need to have 12 volts on the + pole of the coil when the ignition is turned on. (the way it works is that the signal wire pulls the - pole to 0 volts, causing a current to flow through the coil from + to -, which in turn creates a current in the main coil, much like any AC transformator) FABRICA MI DIEM, PVNC! |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
no ignition on ae86 - katapouser - 12-06-2007, 01:15 PM
Engine resting.... - jondee86 - 12-07-2007, 08:47 AM
same problem - mirageR - 12-15-2007, 07:09 AM
Holmes to Watson.... - jondee86 - 12-18-2007, 08:07 AM
[] - Ivan141 - 12-21-2007 12:47 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Ignition switch plug and wires | Blaze0010 | 3 | 2,271 |
11-25-2024 12:29 PM Last Post: Blaze0010 |
|
| 20v Silvertop stock ignition timing and fueling maps | Lykowsky | 5 | 16,518 |
07-18-2019 03:52 PM Last Post: oldeskewltoy |
|
| extracted freedom ecu 16v ignition map | ditn | 7 | 11,144 |
08-22-2016 10:01 AM Last Post: ditn |
|
| 4AGE 20v Ignition Lead Length | mad.matt | 3 | 7,957 |
10-01-2014 03:43 PM Last Post: mad.matt |
|
| [Tutorial Video] Setting 4A-GE Ignition Timing | Homem Bomba | 0 | 6,621 |
04-21-2014 02:41 PM Last Post: Homem Bomba |
|
User(s) browsing this thread: 1 Guest(s)