My new AE86 (new pics)

Posted: Tue Oct 23, 2007 3:36 pm Post subject:

I've been working on my car:

* gearbox & clutch oil changed
* new handbrake lines
* reconditioned rear brakes
* rear strut bar installed

6. Go-Drift day // Belica:

Go-Drift drivers (ZaX, Kas, Ozy, Toninho, Gjuro):

Posted: Wed Jan 16, 2008 5:51 pm Post subject:

For my birthday, I decidec to give myself a new engine. Choise wasn't so hard, because I wanted a strong and durable N/A engine which could withstand drift torture and would last long time.

After consulting a few people in Croatia and here on AEU86, I decided to buy u 20v Blacktop engine from Malaysia - LeeKun was my choise and I didn't regret it so far.

Here's a few pic's from rebuild process

Blok

Radilica

Klipovi

Glava sa 20 prekrasnih ventilića

Šerafi se...

usisna grančica na koju će doći ITB-ovi i kasnije trube malezijskog simfonijskog orkestra

LeeKun changed stock con-rods with Silvertop ones because they are stiffer

Ventilćeki... 1...2..3..4..5... ima ih 20 Very Happy

Gumice, dihtunzi... sve oriđiđi Toyota OEM

reparirani anlaser

Blok je gotov

pa onda i lakiran

Glava je obrađena

Karter polakiran

look at this beauty

Skoro gotovo

testiranje motora

And the result!!!

LeeKun send me something around 500 pics and 27 videos which he made during this rebuild - many thanks and big thumps up.

Engine will come to Croatia in about 1,5 month

Posted: Thu Jan 17, 2008 9:14 am Post subject:

Thats a really nice rebuild Drool

Are you going to bash the firewall to make it fit?

Posted: Thu Jan 17, 2008 11:36 am Post subject:

Joined: 11 Jan 2008 Posts: 4 Location: Wales

gjuro do you by any chance have any photos of the conversion you have done on the waterway on the back of the cylinder head and the outlet on the front of the head ?

Posted: Thu Jan 17, 2008 1:44 pm Post subject:

Posted: Mon Jan 21, 2008 3:55 pm Post subject:

As I bought Blacktop engine, I decided to do a rebuild of my hachi

This saturday we gathered and pulled the old engine out, together with some other parts that are going to be rebuild and painted

I think you will recognize few people on this pictures

At the start (ZaX & Tile)

Mission finished - 19.00h

Mrgud & Gjuro

Our Snjezana

Heating

Frx

Engine is out

Diff also

Vladx

Done - thnx to Tile, Zax, Mrgud, Ozy, Tonči, Vladx, Frx, Mare, tata Gjuro

Posted: Mon Jan 21, 2008 9:36 pm Post subject:

Nice to have friends! Thumbsup

Posted: Mon Jan 21, 2008 11:04 pm Post subject:

Wow...almost the complete croatian AE86 drivers crew to help you out..not bad!

Posted: Tue Jan 22, 2008 11:21 am Post subject:

Ordered complete set for LSD repair

It costs 140 € without Koyo bearings in Croatia

90501-23474 Spring 4x 56,85 kn
41361-14051 Washer 2x 252,22 kn
41385-14010 Plate 2x 230,31 kn
41361-14070 Washer 2x 225,16 kn
41383-14010 Washer 2x 221,92 kn
41315-22011 Nut 2x 131,93 kn

Also I need:
90368-41050 Bearing Koyo 2x 884,38 kn

Posted: Tue Jan 22, 2008 8:38 pm Post subject:

good good good! Cool

Posted: Fri Jun 13, 2008 2:53 pm Post subject:

As you probably know, I ordered Blacktop engine from Malaysian engine builder LeeKun.
Engine finally arrived after 4,5 months. In the meantime, I preped my car for paintjob.

It was going to be painted in Toyota Super White II color

Me, and my cargo, when it finally reached Croatia

In no-time, there was 6 people at my home, honering the Blacktop. I left it in my kitchen for 10 days, while the car was being painted

After that, we started assemling my car

Vladx inside – not powerfull as Blackie, but powerfull than my old engine

New Sprinter rear lamps

sideskirts from my other AE86

Interior is done, roll bar installed

Croatian Smokey Nagata - Kas

Tachometer back to zero, OK back to 00002 km

Taaa daaaa – car is assembled, siting on 14“ wheels, without an engine

Posted: Fri Jun 13, 2008 3:31 pm Post subject:

Very nice.. may I ask how much you paid for the engine? (pm me if you dont want to make it public).

Posted: Fri Jun 13, 2008 4:09 pm Post subject:

After the car was assembled I took it to my friend place, so that new heart could be transplanted

Engine going in Drool

My friend Cajo

Tile & Ozy

We preped the engine in 2 days, because of all the sensors and firewall. I first banged the firewall until it was ready to burst, but when we lowered the engine, it was clear that the firewall had to be cut away. So bit of a advice, for all of you that are planning to install 20V without relocating the rotor, cut your firewall and mend it from inside of the car before puting the engine in.

Trumpets Thumbsup

Finally...

New exhaust

Black hood

More pics will follow... Cheerleader

Posted: Fri Jun 13, 2008 4:57 pm Post subject:

n1 buildup! is it expensive doing you car there?

In holland you can get some peepz to bring it to poland for 3000 euro's ?

Posted: Fri Jun 13, 2008 5:00 pm Post subject:

Nice...

Itsuki Joined: 23 Mar 2008 Posts: 14 Location: Hungary

Very nice build, congrats. You are the famous croatian customer of LeeKun.. Cool

I'm the "famous" hungarian Very Happy

. You can check it out here:

http://hacsiroku.blog.hu/2008/06/08/eltuntem_de_megjott

My question would be: where is the rollcage from? Who is the manufaturer, what was the price for it, shipping time and cost, what does it weight, is it custom made for the AE86? I'm planing to have a cage as well, but the homologated, welded WRC cage is just too heavy. And I could not figure out any european options, Cusco from Japan would be to slow to arrive, and also a bit expensive. Your help would be very appreciated.

Thank you and keep up with the nice work.

TeZe

Posted: Sat Jun 14, 2008 5:40 pm Post subject:

Hi Teze,

nice to know that you also got your engine.

Regarding the rol-bar, Zax bought it on e-bay a couple of years ago for something like 150-200 euro i think. Manufacturer is Heigo.

It's made from aluminium and it's really easy to install and uninstall in AE86. I think the whole cage weight's around 20 kg.

When are you installing your Blacktop?

Itsuki Joined: 23 Mar 2008 Posts: 14 Location: Hungary

Hi Gjuro,

thank you for the quick reply. In the mean time I did find the webpage of the manufacturer, and also the cage you probably have. The price is a bit higher, as for your friend Zax was, but at least they are building it.

If anybody else is interested:

http://www.heigo.de/ASP/index.asp?PID=&ACT=...2&SCAT=Toyota

The Black Top will be installed this summer, but first we have to take care of the rust, build in the cage, make the new paint and then the BT can come in. It should be running ready in September.

How is yours? Does it feel much stronger then the original 4A-GE did?

Cheers, TeZe

Posted: Sat Jun 14, 2008 8:06 pm Post subject:

what kind of trumpets are these ? how much and where did you buy it ? i am looking for a set ...

Posted: Sat Jun 14, 2008 11:26 pm Post subject:

Posted: Sat Jun 14, 2008 11:35 pm Post subject: Re: Thank you

Joined: 16 Jun 2008 Posts: 1

Hey what rails are you using for that sparco evo2?

Posted: Mon Jun 16, 2008 10:34 pm Post subject:

dude, what you doing in someone else's thread? you already have like, 1 new member thread with the same stuff, and a project thread with the same stuff... ?

@gjuro: can't wait for clips of the roaring engine sound Cool

Posted: Tue Jun 17, 2008 1:11 pm Post subject:

Changed the oil yesterday. This is a third change since i installed the engine and the car has done only 320 km.

Also I bought Castrol TWS 10W60 syntetic oil which I'm going to put in at around 800-900 km.

Today I'll install co-driver seat and then make a photo shot and some videos so you can hear the beast Thumbsup