|
| Author |
Message |
Roye
Joined: 29 Feb 2008
Posts: 6
Location: Norway
|
 Posted: Tue Apr 22, 2008 1:49 am Post subject: Celica F-diff with Hilux/ Pickup Torsen diff |
 |
|
Not long ago I bought a Celica GT RA40 and I need a LSD.
So I need help with some issues.
Is it so that every F-axle and diffs fit between each other?
Is there any difference, like the T-diff, that I need to look out for?
Will be most thankful for tips and link to where I can buy a F-diff with LSD that will fit my Celica F-axle.
_________________
1978 Celica GT RA40
1982 Cressida DX RX60
1982 Carina DX TA60
|
|
| Back to top |
|
 |
assassin10000
Ryousuke
Joined: 31 Aug 2006
Posts: 131
Location: Sacramento, CA
|
| Posted: Tue Apr 22, 2008 5:37 pm Post subject: Re: Celica F-diff with Hilux/ Pickup Torsen diff |
|
|
| Roye wrote: | Not long ago I bought a Celica GT RA40 and I need a LSD.
So I need help with some issues.
Is it so that every F-axle and diffs fit between each other?
Is there any difference, like the T-diff, that I need to look out for?
Will be most thankful for tips and link to where I can buy a F-diff with LSD that will fit my Celica F-axle. |
You can buy just the 'Torsen LSD' itself and have it installed into your current F-series diff housing.
The detroit true-trac is a torsen lsd for the 7.5" toyota diff, but unlike the factory torsen it doesn't break at 400 hp (supposedly). It was originally designed for the 4x4 toyota front 7.5 and is meant to take a lot more torque than the OEM one - afaik.
See more info here:
http://forums.celicasupra.com/showthread.php?t=10188
OR kaazusa has found which one will fit the 82-85 F-series independent rear susp, which is a direct swap into the older solid axle F-series diffs
http://www.kaazonline.com/8285.html
Andrew
_________________
1984 AE86 SR-5 (GT-S Converted)
1995.5 Toyota Tacoma 4x4 (Hilux)
|
|
| Back to top |
|
|
Roye
Joined: 29 Feb 2008
Posts: 6
Location: Norway
|
| Posted: Wed Apr 23, 2008 8:32 pm Post subject: |
|
|
Thanks.
So all 7,5" F-diffs fits each other, IRS/IFS and solids?
How about such things as ring gear bolt pattern and number of driveshaft splines?
No worries...?
_________________
1978 Celica GT RA40
1982 Cressida DX RX60
1982 Carina DX TA60
|
|
| Back to top |
|
|
r.hellenbrand
Joined: 25 Sep 2006
Posts: 8
|
| Posted: Thu Apr 24, 2008 3:13 pm Post subject: |
|
|
Hi,
You want to remove the torson diff, or are you looking for one?
Thanks,
Ron
|
|
| Back to top |
|
|
Roye
Joined: 29 Feb 2008
Posts: 6
Location: Norway
|
| Posted: Thu Apr 24, 2008 8:06 pm Post subject: |
|
|
I am looking 
_________________
1978 Celica GT RA40
1982 Cressida DX RX60
1982 Carina DX TA60
|
|
| Back to top |
|
|
assassin10000
Ryousuke
Joined: 31 Aug 2006
Posts: 131
Location: Sacramento, CA
|
| Posted: Fri Apr 25, 2008 5:56 pm Post subject: |
|
|
| Roye wrote: | Thanks.
So all 7,5" F-diffs fits each other, IRS/IFS and solids?
How about such things as ring gear bolt pattern and number of driveshaft splines?
No worries...? |
Ring gear bolt pattern is the same for all 7.5" toyota gear sets, Driveshaft splines are the same (28mm O.D./27spline axles).
To fit a 'detroit truetrac' torsen lsd in a RWD F-series housing you need to use the carrier bearings from the 95-04 hilux (1st gen toyota tacoma here in the states) part #:
90368-50006 | Carrier Bearing
All this info is covered in the linked post - afaik.
Andrew
_________________
1984 AE86 SR-5 (GT-S Converted)
1995.5 Toyota Tacoma 4x4 (Hilux)
|
|
| Back to top |
|
|
Roye
Joined: 29 Feb 2008
Posts: 6
Location: Norway
|
| Posted: Tue Apr 29, 2008 9:13 pm Post subject: |
|
|
Thanks a lot, Andrew!
_________________
1978 Celica GT RA40
1982 Cressida DX RX60
1982 Carina DX TA60
|
|
| Back to top |
|
|
|