Mikzu IV, ae86 from Luxemburg

Posted: Wed Dec 12, 2007 3:53 pm Post subject:

You could do that, but it will smell very bad as there is alot of oil inside there.
And don't forget the oilseal thats behind the bearing, they don't like temperatures above 120 degrees C.

1.5kg is to light, you should rent one of 3kg or so @ machine-hire-shop-thing. Or build something with a thick plate, tube and an old wheel or so.

Wataru Joined: 05 Nov 2007 Posts: 81 Location: Luxemburg

I have a light problem with my suspension, my car is lower on the left side, when it's on straight surface.
It's been lowered 40mm and has bilsteins.
I don't know if the problem comes from the front or rear axle,

What do you think?

Posted: Sun Feb 24, 2008 11:11 pm Post subject:

measure your ground clearance around all 4 corners of the car, that's not too difficult to do, and you'll know where to look for the problem.

Posted: Tue Feb 26, 2008 12:52 am Post subject:

be sure to measure it on the center of the wheel. So when you look behind the wheel and then on the chassis point. (if its not dented)

If I read your post correct your springs are cut. That could be a problem.

btw could you make some pics of the rollcage?