Ivan's coupe: roof stuccowork
|
05-01-2021, 10:38 PM
(This post was last modified: 05-01-2021 10:39 PM by Ivan141.)
Post: #540
|
|||
|
|||
RE: Ivan's coupe, [interior painting done]
I've had a lot to think about with regards to the project.
Have been plowing forward with nothing but paint in mind, but now that only the outside remains to be done I have been considering how awkward it would be to have a painted car and then have to do lots of work in and around it and risk damaging stuff. Have concluded that there is a ton of small stuff that can needs doing before assembly can begin in earnest and there is no time like the present, so get to it. The new 'plan' for the coming months: 1:Get the chassis rolling & steering 2:Prepare all parts that need to go on the car 3:Tackle sound & heat insulation. Have made some progress on points 1&2 today: The steering box and column looked like shit, not worth the effort of taking them apart for blasting/coating, so just attacked 'em the old fashioned way, with a wire wheel and paint. Slap some epoxy primer on after wire wheeling all the rust off: Slap some cheap black paint on: Finished product with 2k clearcoat applied I could not get the height adjustment off so I had to leave the top bit of the column rusty, was afraid I would break something. Anyone know if it's that bolt on the height adjustment handle that needs to come out? It's so stuck that it requires application of the ugga-dugga, but I wussed out. Another step towards parts preparation: Get ALL the bolts zinc plated. No shit looking bolts on a clean shell. Will be going for an unassuming matte silver coating instead of the yellow passivated look. The stuff I'm going for is over 5 to 10 times more rust resistant than the pretty looking plating. First need to get them weighed in.. including loads of spares and new bolts I have about 13,5 kg's of bolts ready to go. Also have a bunch of bracketry that WILL be getting a more regular zinc coating. Hopefully I can show off buckets of shiny bolts in my next post. FABRICA MI DIEM, PVNC! |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Front end roof compatibility between 2dr and 3dr | Dochka | 11 | 12,090 |
01-12-2014 05:50 PM Last Post: fax0815 |
User(s) browsing this thread: 7 Guest(s)