PCD adaptation

[kazi]

(01-15-2019 12:02 PM)jondee86 Wrote:  I'm pretty sure that the reason you don't see 4 x 114.3 to 5 x 100
adapters for the AE86 style hubs/lug nuts is that it is impossible to
make such an adapter. The holes are too close together to allow
room for the counterbore required for standard lug nut fixing. This
pic shows how close they are when using capscrews...



Those are 4 x 100 to 5 x 100 adapters. Using 4 x 114.3 moves the
four holes out by 7.15mm but then there has to be another hole
added as the long stud can't be used with different PCD's. I seem
to remember wrestling with this issue myself a few years back and
finding that there was no workable answer.

You can get custom 5-stud hubs for the front easy enough, but a
5-stud conversion for the rear is a major unless you happen to be
using a HiLux axle that can be re-drilled to 5 x 100. Maybe weld,
machine and re-drill the AE86 axles might work ?

Cheers... jondee86

I did think it was something like that. This makes me sad lol. I’ll have to wait it out for a set of 4x100 wheels I guess