CR Variables
|
04-21-2018, 05:38 PM
Post: #8
|
|||
|
|||
CR Variables
We're looking at a 4agZe not an NA.
The pistons are dished no dome. I can only assume that a few of the measurements are guessed. Head volume as well as deckheight may not be stock anymore depending if it was skimmed before or not. The only way to know all this for sure would be to measure everything properly. Honestly it shouldn't be an issue if he ends up with 8.9 or 9.3 - with proper fuel and stock pressure it'll be fine. Sent from my MHA-L29 using Tapatalk AE86 ex-daily |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
CR Variables - Alex170984 - 04-20-2018, 12:02 AM
RE: CR Variables - Alex170984 - 04-20-2018, 11:02 AM
CR Variables - Bean - 04-20-2018, 05:14 PM
RE: CR Variables - Project D - 04-20-2018, 10:53 PM
CR Variables - Bean - 04-21-2018, 08:39 AM
RE: CR Variables - Alex170984 - 04-21-2018, 11:01 AM
RE: CR Variables - Project D - 04-21-2018, 02:32 PM
CR Variables - Bean - 04-21-2018 05:38 PM
RE: CR Variables - Alex170984 - 04-22-2018, 11:04 AM
CR Variables - Bean - 04-22-2018, 11:38 AM
RE: CR Variables - oldeskewltoy - 04-23-2018, 06:04 AM
RE: CR Variables - Dave W - 04-23-2018, 03:00 PM
CR Variables - Bean - 04-23-2018, 05:02 PM
RE: CR Variables - Dave W - 04-24-2018, 01:47 PM
RE: CR Variables - oldeskewltoy - 04-30-2018, 05:48 PM
RE: CR Variables - Project D - 04-30-2018, 06:32 PM
CR Variables - Bean - 04-30-2018, 07:38 PM
RE: CR Variables - oldeskewltoy - 04-30-2018, 08:44 PM
|
User(s) browsing this thread: 1 Guest(s)