Engine rebuild questions

[Alex170984]

I used oversize NPR pistons when I rebuilt my engine. Haven't had any issues with them and used the NPR rings they came with. Seem to be pretty good value compared to the cost of OEM oversize pistons and rings.

I used Mahle bearings in my engine, considered ACL but they cost more and I didn't really need them.

My gasket kit cost about £40 but I didn't get the TB gasket, however this was made from a Cornflakes packet.

Regarding the HG; I had my block bored out obviously but did not have it decked only because the machinist said it was very good anyway. However I did have the head skimmed, but have had no issues with my Cometic gasket regarding leakage. I am using it again as well since I've had to rebuild my cylinder head!