Tanuki!

[Touge86]

I have a new project. Although I am taking on someone else's project I still want to keep track of everything I do to it. He has a lot done to the car, but it needs even more.

Original FS Thread:

"This is a 1985 Toyota Corolla. I started this as a ground up restoration 3 years ago, putting all my time and money into it! And is about 95% complete. I want to have the perfect car, one that you be for the track but perfect in everyway. So I started with stripping the car to bare chassis, having a 12point chromolly scca/ fia spec cage than rotating the car UPSIDE DOWN to been the underside could be painted. Every nut, bolt or bracket was either bought new or re zinc plated. All suspension conponents were powder coat in coulding the rear end. The motor was built by the top Engineer and designer and Banks Power. From changing my mind a couple times I have extra swaps, rear end and bunch of other stuff. So I'll try to make a list. here it goes! lol

Motors:
in car, 20v blacktop on Tec II by DansToy
fully built motor, (NEW) 16v Red top:
-ported and flow benched head
-Toda valve train
-Toda Cam gears
-Weisco 12/1 pistons, ceramic on top and teflon on sides
-Shot peened rods
-Plane Edged Crank
-ARP head and rod bolts
-Web Billet cams
-Mukuni 44mm Carbs
-TWM port matched intake manifold

Suspension:
-(NEW) JIC full coil overs
-(NEW) set of four Tokico HTS sturts
-(NEW) TRD rear springs
-(NEW) heimed four links
-TRD Bushings
-and about $500 in teflon heim joints with off sets

Brakes:
-Brembo slotted only! rotors
-Project MU pads
rebuilt calper kits

and a bunch of other stuff... Spacro Pro 2000 seat, few nardi's, spare rear end
spare motor, maybe a car trailer...

Call me if you have any questions. Olen at (909) 915-8532
and I will post pics at myspace.com/OlenMain"

Here are the original Sales Pics I got from him: