Making of originally concepted DeLorean
05-25-2007, 04:39 PM
Post: #1
Making of originally concepted DeLorean
For all of you DeLorean fans,really don't know if you saw this allready,but i was amazed.

Did you know that John Z. DeLorean’s original plans for the iconic DMC-12 included a Citroen Wankel rotary engine, dubbed Comotar (developed by NSU and Citroën)? Of course, that never happened and the DeLorean ended up with an underpowered 130 bhp V6 engine jointly developed by Renault, Peugeot and Volvo. However, some lads decided to hook on DeLorean’s original vision and replace the ill-fated French V6 with a 300Hp strong, 2.0-liter 3-rotor rotary engine from the 1990 Mazda Eunos Cosmo.

And that’s not all. Since the stock transmission didn’t seem to be able to handle the power upgrade, they replaced it with a 6-speed manual transmission with Limited Slip Differential from a 1995 Porsche 911 Carrera 2. According to the guys who did the engine-transplant, zero to 60mph (96 km/h) has been measured at 4.5 sec. Quarter mile has not been tested, but they estimated it to be around 13 sec.

http://carscoop.blogspot.com/2007/05/del...ngine.html
Visit this user's website Find all posts by this user


Messages In This Thread
Making of originally concepted DeLorean - a112 - 05-25-2007 04:39 PM
[] - Apolan - 05-25-2007, 04:45 PM
[] - Mux213 - 05-25-2007, 04:56 PM
[] - JTA - 06-16-2007, 02:04 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication