4agze wiring problem

[jondee86]

Yes... the GZE CAS has one tooth that seems a little longer than all the
others and has a small circle or dot on the end of the tooth facing you.
Make the CAS fixing bolt about the middle of the adjustment slot with the
long tooth aligned with the groove on top of the CAS body casting. Push
the CAS straight in... always works for me

Then you need to connect each coil to the correct pair of cylinders. 4-post
coilpacks are usually two double ended coils... each coil fires two cylinders
in wasted spark. Firing order is 1-3-4-2 with one coil firing cylinders 1 + 4
and the other coil firing cylinders 2 + 3. If the engine does not fire up after
a couple of tries, swap the coil trigger wires around.

Cheers... jondee86