OST-042-01: The Dubai Deception

[oldeskewltoy]

(08-24-2016 10:55 PM)Bean Wrote:  That picture is perfect for a safety first advert





You could set-up the gopro in time-lapse mode at a fixed position over your working area and just see how it turns out. Maybe someone here will be willing to edit the footage (not me for sure, I suck at editing).

Edit: Strapping the camera to your chest might work too depending how much you move.

First.... I should have a contest... "How many safety errors do you see?"


Part of why I do photos... is I can edit them... and show what I want to show... and keep my skills/techniques less visible. Another big reason.... doing port work is a passion... doing all the other crap... less so...


sooooooooooo..... back to THIS build......


Crank and rods are ready..... bearings selected





Blocks, appropriate ones for a S/C build(7 rib none drainback, non notched/20V oil pan), are getting tougher to find. It took me nearly a month to find this one! And while the bores were fair, and standard, this block required .008" removed from the deck because the surface was that poor that it required that deep a cut. I'm using a metal gasket, so since I can size the gasket, the deck is cut enough to provide a good seal




more to come.......