Scuderia rollator CE86 trueno project

[Ivan141]

Got the old fingers out of our noses again today. Started by trying to fit an 89 Camry bonnet latch to the Trueno to see if we can fit the new(er) bonnet without using the fuck-ugly bonnet pins.
First problem we ran into was the lack of downward support (as this was removed to fit the intercooler and cooling fan). Without this the whole latch assembly flops around way too much for the bonnet to ever close.
I fabbed up a little bracket for this purpose, but it was for nought since the camry latch is too low. Will pick up another model soon to see if we can find something that works.

For the rest we pulled about all the wiring from under the dash and disconnected it / cut it out. There was a godawful spaghetti under there, an many things where not wired up as they should be, so I'll be redoing all of it.
Maybe NoHachi will post up some pics of the wiring mess as a warning to all people buying swapped cars.