Oil leaks - Help
10-18-2018, 11:39 PM
Post: #3
RE: Oil leaks - Help
(10-18-2018 11:16 PM)Bean Wrote:  Technically it could be done in place but you would need to remove a lot.
Getting the pulley of can be tricky. I made a specific homemade puller to get it of safely.
If it was me I'd take the engine out.

As you don't have a lot of experience have at least someone knowledgeable to give you a hand.

Sent from my MHA-L29 using Tapatalk

Thanks for replying.

Sounds to me that i should avoid it then to be honest. I dont know any1 who could help so i would be going solo.
I could handle oil pan gasket, head gasket, proably cam seals aswell, but main crank seal and rear seal sounds like a no go.
Find all posts by this user

Messages In This Thread
Oil leaks - Help - Bojack - 10-18-2018, 11:03 PM
Oil leaks - Help - Bean - 10-18-2018, 11:16 PM
RE: Oil leaks - Help - Bojack - 10-18-2018 11:39 PM
Oil leaks - Help - Bean - 10-19-2018, 08:10 AM
RE: Oil leaks - Help - Dave W - 10-19-2018, 01:34 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  trans oil, lsd oil change Apolan 9 14,904 10-01-2014 03:57 PM
Last Post: mad.matt
  Oil cooler -> low oil pressure Jan Pedersen 24 26,216 06-06-2013 07:36 PM
Last Post: Deuce Cam
  4AGE crankcase gas and oil pressure too high, sprinking oil demogun 5 6,446 10-01-2011 09:47 AM
Last Post: demogun
  SARD oil pressure gauge - help XJS 3 4,204 05-27-2010 02:02 PM
Last Post: XJS
  Oil pump pics/info - a little help? assassin10000 1 2,677 01-31-2009 06:57 PM
Last Post: assassin10000

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication