OST-054: 3 rib with snap
02-13-2019, 06:07 PM
Post: #13
RE: OST-054: 3 rib with snap
from another forum Wrote:As many heads that you rebuild, take 25 minutes and make a holding fixture from small section of angle iron, that will bolt on to your bench grinder. As long as you set the valve stem square to a fine grit wheel, you can easily remove a couple thou by hand at a time. Just have a container of water handy for cooling the valve stem be measurement checks. Sure is better, then waiting on a machine shop, so you can finish the head assembly. davew


If tipping was the only thing I needed, something along those lines would work... but I've been thinking it might be time for my next equipment upgrade. My last significant change was switching from Dremels (yes plural - I used up about 6) to the Foredom 1/6hp SP hanging motor, and hand tools.

[Image: AEU86 AE86 - RE: OST-054: 3 rib with snap]


I been thinking it might be time for my own valve grinding machine.

[Image: AEU86 AE86 - RE: OST-054: 3 rib with snap]


This would allow me to do some experiments on valve back cut angles, along with precisely tipping the valves. Now, a new kwik way will run me about $7000. I might find a good used one for about $4000-$5000. The keys are the stones, and the chuck - the chuck needs to be accurate to .0005" Huh

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
OST-054: 3 rib with snap - oldeskewltoy - 01-10-2019, 01:07 AM
RE: OST-054: 3 rib with snap - kazi - 01-11-2019, 07:00 PM
OST-054: 3 rib with snap - Bean - 01-18-2019, 08:06 PM
RE: OST-054: 3 rib with snap - oldeskewltoy - 02-13-2019 06:07 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  (Catching up) OST-086 MM: Built for Mario oldeskewltoy 2 1,788 10-28-2022 08:23 AM
Last Post: decryphe
  OST-093: My, My, Mystery oldeskewltoy 10 3,018 09-18-2022 02:19 AM
Last Post: oldeskewltoy
  (Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams oldeskewltoy 5 2,187 09-09-2022 09:07 PM
Last Post: Vaptor
  (Catching up...) OST-083: Salvage operation oldeskewltoy 2 1,459 07-11-2022 08:32 PM
Last Post: banpei
  (Catching up...) OST-082: Nope, never again... at least not without all the parts oldeskewltoy 0 1,186 06-28-2022 09:17 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication