OST-050 - a VERY special build
|
12-06-2018, 12:14 AM
Post: #44
|
|||
|
|||
RE: OST-050 - a VERY special build
(11-23-2018 07:25 PM)Nakilad Wrote: I always find it amazinng the amount of detail you go into on these projects Dan. It's fascinating to see some of the solutions you come up with! ![]() With cam timing "corrected", it's time to do a rough setting on ignition timing. Set the crank pulley to 10 degrees, and set the distributor to #1 ![]() At the same time the TPS was set so it should start and idle. With the new cams, and new pistons/rings, my client will want to keep initial start up/break in to about 2000 rpm for about 10 minutes.... The assembled engine... (the fine print: 10.6:1, 244/212 8mm lift - set to 111 centers, HKS valve springs, ported head, light weight wrist pins, fully balanced) ![]() As to the cam covers.... in the end this took the most amount of my time... they took a professional painter nearly 6 weeks doing them multiple times and they still are less then perfect ![]() Dan - You can | ![]() OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
(Catching up) OST-086 MM: Built for Mario | oldeskewltoy | 2 | 2,750 |
10-28-2022 08:23 AM Last Post: decryphe |
|
OST-093: My, My, Mystery | oldeskewltoy | 10 | 5,485 |
09-18-2022 02:19 AM Last Post: oldeskewltoy |
|
(Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams | oldeskewltoy | 5 | 3,654 |
09-09-2022 09:07 PM Last Post: Vaptor |
|
(Catching up...) OST-083: Salvage operation | oldeskewltoy | 2 | 2,346 |
07-11-2022 08:32 PM Last Post: banpei |
|
(Catching up...) OST-082: Nope, never again... at least not without all the parts | oldeskewltoy | 0 | 1,854 |
06-28-2022 09:17 PM Last Post: oldeskewltoy |
User(s) browsing this thread: 1 Guest(s)