My 20v ITB installation

Threaded Mode | Linear Mode

My 20v ITB installation

01-15-2005, 08:40 PM

Post: #23

Ian.G

Posting Freak

Posts: 762
Joined: Oct 2004
Reputation: 0

The mess is gone...

Well,

today I made a difference to my hachi Smile

if you remember my ITBS looked like this behind those trumpets

[Image: AEU86 AE86 - The mess is gone...]

So, after approx 1 hour of cleaning gasket sealant and some metal cleaner they looked like this.

[Image: AEU86 AE86 - The mess is gone...]

I was at the autosport show yesterday and managed to pick up a set of pipercross C1050 trumpet socks direct from their stand at half the retail price. Thumbs up!

This is what was waiting to be installed onto the car...

[Image: AEU86 AE86 - The mess is gone...]

And after a bit of spannering...hmmmmmmm.... trumpets Yummie!

Gasket seal was cleaned up and the socks installed and zip tied into place.

What with getting the timing sorted and fitting these the car is pulling like a trooper - its really smoothed things out and it revs hard as you like again. I was so happy I decided to navigate an entire roundabout - sideways LOL.

Regards Ian.
[Image: AEU86 AE86 - The mess is gone...]

« Next Oldest | Next Newest »

Messages In This Thread

My 20v ITB installation - Ian.G - 12-31-2004, 05:43 PM

[] - Squeejy - 12-31-2004, 06:04 PM

[] - Ian.G - 12-31-2004, 06:48 PM

[] - ZaX - 12-31-2004, 08:23 PM

[] - Squeejy - 12-31-2004, 08:50 PM

[] - Ian.G - 01-01-2005, 11:55 AM

[] - ZaX - 01-01-2005, 01:28 PM

[] - Mux213 - 01-01-2005, 01:52 PM

[] - Ian.G - 01-01-2005, 02:11 PM

[] - Ivan141 - 01-01-2005, 02:38 PM

[] - Ian.G - 01-01-2005, 03:16 PM

[] - gon - 01-07-2005, 10:58 PM

[] - Ian.G - 01-11-2005, 09:37 AM

[] - mo-racing - 01-11-2005, 09:58 AM

[] - mo-racing - 01-11-2005, 10:00 AM

[] - Ian.G - 01-11-2005, 10:38 AM

[] - mo-racing - 01-12-2005, 08:58 AM

[] - Widar - 01-12-2005, 09:07 AM

[] - mo-racing - 01-12-2005, 09:40 AM

[] - The Doctor - 01-12-2005, 12:52 PM

[] - JFR - 01-12-2005, 10:46 PM

[] - Ian.G - 01-13-2005, 09:44 AM

The mess is gone... - Ian.G - 01-15-2005 08:40 PM

[] - rikard - 01-15-2005, 08:47 PM

[] - Mux213 - 01-15-2005, 08:49 PM

[] - Widar - 01-15-2005, 10:37 PM

[] - Ivan141 - 01-15-2005, 11:09 PM

[] - Ian.G - 01-16-2005, 03:19 AM

[] - ZaX - 01-16-2005, 11:25 AM

[] - Striker - 01-16-2005, 07:06 PM

[] - Ivan141 - 01-16-2005, 08:43 PM

[] - Mux213 - 01-16-2005, 09:32 PM

[] - Striker - 01-17-2005, 12:41 AM

[] - Ivan141 - 01-17-2005, 01:13 AM

[] - Striker - 01-17-2005, 01:25 AM

[] - gon - 01-17-2005, 01:44 AM

[] - Striker - 01-17-2005, 01:55 AM

[] - AndrE86 - 01-17-2005, 08:45 AM

[] - Striker - 01-17-2005, 05:39 PM

[] - NoHachi - 01-17-2005, 05:54 PM

[] - s.bjelke - 01-17-2005, 06:03 PM

[] - Striker - 01-17-2005, 06:12 PM

[] - ZaX - 09-06-2005, 11:55 AM

[] - Ian.G - 09-06-2005, 12:42 PM

[] - ZaX - 09-06-2005, 12:49 PM

[] - SilentScope111 - 06-16-2007, 04:56 AM

[] - byd1380 - 06-18-2007, 02:19 PM

[] - robokill - 06-24-2007, 06:23 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	4A-GE 20V ITB bolt patterns	kjb	7	12,990	02-27-2016 01:23 PM Last Post: kjb
	How to install 20V ITB on 16V head	Mr.komp	7	12,637	12-28-2015 05:35 PM Last Post: pack
	Machining Pistons to run 20v head... And FCR's on a 20v?	PazzaAE86	2	5,504	09-15-2013 01:08 AM Last Post: jondee86
	20v itb inlet manifolds	totta Crolla	24	28,631	12-14-2012 12:21 PM Last Post: Bean
	4AGE 20v ITB vacuum instructions on Intecracing.com	JAVResistance	17	36,001	05-07-2011 05:50 AM Last Post: jondee86

User(s) browsing this thread: 1 Guest(s)