|
What cams
|
|
07-18-2008, 12:25 AM
Post: #8
|
|||
|
|||
|
With anything above 8.0mm-8.1mm lift you will definatley need better springs, anything over what i have mentioned and the stock spring will bind up, very not good.
Toda and TRD make good springs. Not all that expensive either. Just as a general rule too, the more wild the cam the more compression you will need to make the most out of the cams. Steve.....this is sparrrrrtan |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
What cams - totta Crolla - 07-01-2008, 08:03 PM
[] - projectrollas - 07-01-2008, 08:19 PM
[] - totta Crolla - 07-01-2008, 09:37 PM
[] - totta Crolla - 07-01-2008, 10:15 PM
[] - fkn16v - 07-18-2008 12:25 AM
[] - The Big Yin - 07-18-2008, 12:45 AM
[] - projectrollas - 07-18-2008, 12:51 AM
[] - The Big Yin - 07-18-2008, 01:28 AM
[] - projectrollas - 07-18-2008, 01:36 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Shim size for AM cams | kazi | 4 | 5,971 |
12-18-2017 05:34 PM Last Post: oldeskewltoy |
|
| Toda Cams | Alex170984 | 7 | 9,721 |
02-11-2017 05:50 PM Last Post: Alex170984 |
|
| 20V cams - CATCAMS vs KELFORD? | Grant | 19 | 41,427 |
11-19-2015 07:45 AM Last Post: hachirokkos |
|
| cams cams cams | megabob | 60 | 63,448 |
12-31-2013 01:19 AM Last Post: gze spec |
|
| part numbers on standard cams | Alex170984 | 10 | 12,240 |
09-19-2013 02:53 PM Last Post: pack |
|
User(s) browsing this thread: 1 Guest(s)