|
What is the maximum valve lift
|
|
07-06-2008, 05:58 AM
Post: #6
|
|||
|
|||
|
you can run any cam on a stock bottom end... its the cylinder head that needs the attention to (mechanically) run a wild cam.
Stock valve springs... are said to bind somewhere close to 8.0mm of valve lift (not cam lift... valve lift will be less - the amount of the clearence) I recommend doing some study on dynamic compression ratio, and how cam duration/timing can affect DCR. Concerning lift... besides spring bind at about 8mm, there is also the bucket towers... somehwere @ or near 10mm of cam lift the bucket towers need to be machined so the cams can turn in their journals Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
What is the maximum valve lift - totta Crolla - 07-04-2008, 10:14 PM
[] - oldeskewltoy - 07-06-2008 05:58 AM
[] - totta Crolla - 07-06-2008, 12:13 PM
[] - oldeskewltoy - 07-06-2008, 09:47 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 4A-GE valve shim disintegrated | DaLanZhu | 2 | 716 |
04-30-2025 12:54 PM Last Post: DaLanZhu |
|
| 4AGE Valve Buckets Scored | Steller Engineering | 2 | 1,354 |
10-06-2023 05:34 PM Last Post: Steller Engineering |
|
| 20 Valve Blacktop smoking after engine flush - why? | RolanTHUNDER | 2 | 2,099 |
11-30-2022 12:09 PM Last Post: RolanTHUNDER |
|
| HKS valve springs | totta Crolla | 3 | 2,802 |
05-25-2022 10:24 PM Last Post: oldeskewltoy |
|
| Valve clearance | leon205gti | 7 | 9,431 |
11-25-2016 03:24 AM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 2 Guest(s)