High Compression Ratio ----> Detonation

Threaded Mode | Linear Mode

High Compression Ratio ----> Detonation

10-16-2007, 11:11 PM

Post: #19

Lipinhu Offline

Senior Member

Posts: 299
Joined: Oct 2004
Reputation: 0

Quote:Even the replacement of the TRD head gasket with an oem one will claw him back nearly half a point, that might just be enough... if it is just too high....

Thats what I would do if it was my case!

I dont understand the obssession for such a high cr. It ISNT that critical when it comes to make power, i mean, not for your cams, or the . And the ignition timing you're going, i believe is making you lose lots of hp, usualy it works the other way arround. I would never consider nothing lower than the 10º btdc.

A standalone ecu (as you mentioned), will defenitly help a lot.

Cump´s
Filipe Oliveira

« Next Oldest | Next Newest »

Messages In This Thread

High Compression Ratio ----> Detonation - apardal - 10-12-2007, 10:46 AM

[] - dikolotour - 10-12-2007, 11:36 AM

[] - NoHachi - 10-12-2007, 01:51 PM

[] - apardal - 10-12-2007, 01:55 PM

[] - Eircamae86 - 10-12-2007, 03:11 PM

[] - NoHachi - 10-12-2007, 04:26 PM

[] - Ivan141 - 10-12-2007, 05:57 PM

[] - apardal - 10-12-2007, 09:44 PM

[] - oldeskewltoy - 10-12-2007, 10:33 PM

[] - NoHachi - 10-12-2007, 11:29 PM

[] - robokill - 10-12-2007, 11:43 PM

[] - oldeskewltoy - 10-13-2007, 01:24 AM

[] - apardal - 10-14-2007, 03:46 AM

[] - NoHachi - 10-14-2007, 10:05 AM

[] - apardal - 10-14-2007, 02:25 PM

[] - jamiemirror - 10-16-2007, 09:21 PM

[] - robokill - 10-16-2007, 09:44 PM

[] - Ivan141 - 10-16-2007, 10:17 PM

[] - Lipinhu - 10-16-2007 11:11 PM

[] - apardal - 10-16-2007, 11:21 PM

[] - oldeskewltoy - 10-17-2007, 06:07 PM

[] - apardal - 10-17-2007, 08:00 PM

[] - apardal - 10-17-2007, 11:23 PM

[] - Uzelac - 03-23-2009, 05:35 PM

[] - irishtwincam - 03-23-2009, 05:50 PM

[] - oldeskewltoy - 03-23-2009, 10:25 PM

[] - jondee86 - 03-24-2009, 03:49 AM

[] - irishtwincam - 03-24-2009, 11:27 AM

[] - totta Crolla - 03-24-2009, 11:20 PM

[] - totta Crolla - 03-24-2009, 11:26 PM

[] - GTRJazz - 03-26-2009, 12:57 AM

[] - jondee86 - 03-26-2009, 06:24 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	High-beam warning lamp	Mylesmck	4	3,073	07-21-2023 07:44 AM Last Post: banpei
	Engine stress at high speeds	gh0st	6	4,465	08-30-2022 07:11 PM Last Post: Power_uP
	82mm Stock compression Pistons	apardal	4	4,218	11-24-2021 04:26 PM Last Post: apardal
	4AGE 16V engine overheat when at high speed	chenfon	32	31,278	12-31-2020 06:39 AM Last Post: chenfon
	working out compression ratios	kazi	2	4,682	07-16-2019 08:22 PM Last Post: oldeskewltoy

User(s) browsing this thread: 1 Guest(s)