|
MAP Harness help
|
|
07-06-2007, 10:24 AM
Post: #9
|
|||
|
|||
|
Dashboard loom ??
Most AE86's I have seen have a connector plug on the engine side
of the firewall, high up near the centreline of the car. This connects the dashboard loom (harness) to the engine loom. On my car the plug had connections for : 1. Backup (reversing) light switch (2 pins) 2. Igniter power supply 3. Water temp gauge (on instrument panel) 4. Oil pressure gauge (on instrument panel) 5. Tacho (rev meter) signal 6. Starter/cold start injector 7. Power supply to injectors 8. One spare pin (9 pins total) No doubt there will be variations according to the model/spec of car, but if this is the connector you are working on, it might help  Cheers... jondee86 The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
MAP Harness help - mrfuzzy - 04-20-2007, 12:42 AM
Smallport into AE86... - jondee86 - 04-20-2007, 10:20 AM
Hicomp bigport... - jondee86 - 04-21-2007, 11:00 AM
Dashboard loom ?? - jondee86 - 07-06-2007 10:24 AM
Down the barrel... - jondee86 - 07-07-2007, 06:56 AM
Mistaken identity !!! - jondee86 - 07-12-2007, 09:44 AM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| AFM to Map Conversion | ps13michi | 3 | 3,927 |
01-06-2022 10:34 AM Last Post: ps13michi |
|
| Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP | mister86 | 12 | 12,681 |
02-10-2020 06:39 PM Last Post: Power_uP |
|
| AE86 4A-GE 16v engine harness rebuild | FanIsHere | 7 | 11,260 |
01-17-2020 08:04 PM Last Post: Project D |
|
| extracted freedom ecu 16v ignition map | ditn | 7 | 9,729 |
08-22-2016 10:01 AM Last Post: ditn |
|
| anyone produce new harness for bluetop?gts driveshaft | dinkers542 | 8 | 9,044 |
11-25-2014 09:18 PM Last Post: dinkers542 |
|
User(s) browsing this thread: 1 Guest(s)