MAP Harness help

[mrfuzzy]

Ok so I got the right harness (japan ae86 one) and installed it but have a few bugs but got the car running. I followed the diagrams and moved the pins i needed to move. Where i stand now is the car runs but it runs super rich rev it and black smoke shoots out. I have a blue/red wire that says its for the tps/map but when i plug it in the car idles like crap. with out it idles fine just hunts. Check engine light throws a code 2 and 7 but havent cleared it since i got it running.

The harness i have has all the connections everything is plugged in except for the thick yellow wire on the 10-pin connector and this green plug i cannot find where it goes see pics.

One major issue currently is I have a powerfc and when i plug that in the car wont even start it. the starter just cranks but the powerfc comes on like everythings fine but thats my second issue would like to get the car running decent first.

Im also using a usdm TPS could that be my problem what im worried about is my map sensor is dead but im kinda stuck at this point not sure what to do.