aftermarket springs
05-02-2007, 04:28 PM
Post: #8
 
I made a custom springs. In fact, it's a copy of KONI 2220-1056 springs with a little modification of rear springs – they are longer for 15 mm. The wire diameter is 12 mm.
I borrowed original springs from my friend's ae86. Zn - galvanized for rust protection.
All included 115€.
Car has approximately 2 cm of drop, and it is stiffer then stock. It’s a very good solution for everyday ride and cheap one also.


Attached File(s) Thumbnail(s)
       

Fun is not the straight line!
Find all posts by this user


Messages In This Thread
aftermarket springs - gt99 - 10-30-2006, 01:36 PM
[] - Max_Misawa - 11-01-2006, 06:09 PM
Re: aftermarket springs - El_Camino - 11-01-2006, 09:06 PM
[] - gt99 - 11-09-2006, 11:53 PM
[] - Ivan141 - 11-10-2006, 12:50 AM
[] - max_ae86 - 11-10-2006, 06:08 PM
[] - gt99 - 01-02-2007, 02:47 PM
[] - max_ae86 - 05-02-2007 04:28 PM
[] - Mux213 - 05-02-2007, 05:07 PM
[] - oldeskewltoy - 05-02-2007, 06:33 PM
[] - Mux213 - 05-02-2007, 10:02 PM
[] - max_ae86 - 05-03-2007, 10:04 AM
[] - oldeskewltoy - 05-04-2007, 12:27 AM
[] - Mux213 - 05-04-2007, 08:08 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  HKS valve springs totta Crolla 3 3,054 05-25-2022 10:24 PM
Last Post: oldeskewltoy
  Aftermarket / Additional Foglights decryphe 6 10,947 07-08-2017 08:45 AM
Last Post: banpei
  Springs from other vehicles?? FanIsHere 16 16,714 05-17-2016 09:12 AM
Last Post: FanIsHere
  wiring aftermarket tachomete izanagi 7 10,713 05-21-2014 08:15 PM
Last Post: banpei
  3rd door support gas springs (stay) - worn out max_ae86 5 6,997 09-01-2013 03:20 PM
Last Post: Jezza_hr

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication