Injector size advice on 7age

[peter møller]

NoHachi Wrote:I come up with about 311cc/min for 170hp. Thats calculating everything to its maximum. More then likely the 295cc/min injectors from 20V engines will be more then enough to sustain your desired horsepower levels.
Do make sure that fuelpressure is within spec at a minimum of 35psi.

Red/blue top injectors will not work properly. You will not get a clean injection of fuel during each cycle. The resulting lean condition in individual cylinders will be hard to detect, but will slowly chew away at an already weak engine design.

Thanks for the info man.....you think AGZE injectors will do the trick? Cant remember their cc/min capacity