Is my setup correct?

Threaded Mode | Linear Mode

Is my setup correct?

11-01-2006, 02:27 PM

Post: #18

firehawk Offline

Senior Member

Posts: 281
Joined: Jun 2005
Reputation: 0

Hoey Wrote:So then i CAN boost a MAP sensored engine? Because switching to a GZE MAP sensor is WAY easier than switching engines and ECU. I know a bit about the Greddy EManage, Ill read up some more. In your opinions is the MS better than E-manage? I hear MS is great but hard to tune.

Yeah, the stock MAP sensor will max out at its pressure limit but because the second MAP sensor is connected directly to the e-Manage, it will be able to run the injectors according to its own fuel mapping. Mohdparts has a pretty good collection of documentation for the eMU;

http://www.mohdparts.com/emanage/index.html

Also, the Yahoo group for eMU is a good resource;

http://autos.groups.yahoo.com/group/E-manage_Ultimate/

MegaSquirt is a great ECU as well, but being a standalone system, there's a lot more work involved in making it work because everything from the wiring harness to all the mappings need to be done from scratch.

« Next Oldest | Next Newest »

Messages In This Thread

Is my setup correct? - Hoey - 10-29-2006, 10:58 PM

[] - SekiguchiUeno - 10-29-2006, 11:19 PM

[] - Hoey - 10-29-2006, 11:40 PM

[] - SekiguchiUeno - 10-29-2006, 11:45 PM

[] - Hoey - 10-30-2006, 12:08 AM

[] - Hoey - 10-30-2006, 12:49 AM

[] - SekiguchiUeno - 10-30-2006, 12:51 AM

[] - Hoey - 10-30-2006, 02:50 AM

[] - jamiemirror - 10-30-2006, 10:24 AM

[] - Hoey - 10-30-2006, 11:02 PM

[] - jamiemirror - 10-30-2006, 11:06 PM

[] - Hoey - 10-30-2006, 11:26 PM

[] - Hoey - 10-31-2006, 05:10 AM

[] - Bad_Dog - 10-31-2006, 09:18 AM

[] - firehawk - 10-31-2006, 09:30 AM

[] - Hoey - 11-01-2006, 06:12 AM

[] - SekiguchiUeno - 11-01-2006, 12:09 PM

[] - firehawk - 11-01-2006 02:27 PM

[] - Hoey - 11-01-2006, 03:12 PM

[] - Hoey - 11-05-2006, 08:42 PM

[] - firehawk - 11-06-2006, 09:34 AM

[] - Morten - 11-06-2006, 08:03 PM

[] - Hoey - 11-06-2006, 10:31 PM

[] - Hoey - 11-07-2006, 09:41 PM

[] - Hoey - 11-08-2006, 02:38 AM

[] - jamiemirror - 11-08-2006, 11:46 AM

[] - Hoey - 11-08-2006, 10:50 PM

[] - Hoey - 11-08-2006, 10:56 PM

[] - jamiemirror - 11-09-2006, 10:32 AM

[] - firehawk - 11-09-2006, 01:15 PM

[] - Hoey - 11-09-2006, 11:15 PM

[] - Ivan141 - 11-10-2006, 12:53 AM

[] - Hoey - 11-10-2006, 03:16 AM

[] - firehawk - 11-10-2006, 09:21 AM

[] - jamiemirror - 11-10-2006, 11:03 AM

[] - Hoey - 11-10-2006, 10:19 PM

[] - Hoey - 11-12-2006, 04:33 AM

[] - Hoey - 11-13-2006, 03:49 AM

[] - jamiemirror - 11-13-2006, 11:52 AM

[] - Hoey - 11-13-2006, 04:56 PM

[] - Hoey - 11-22-2006, 05:40 AM

[] - NoHachi - 11-22-2006, 09:08 AM

[] - Hoey - 11-23-2006, 02:15 AM

[] - Hoey - 11-28-2006, 08:07 AM

[] - SekiguchiUeno - 11-28-2006, 09:04 AM

[] - Hoey - 11-28-2006, 05:28 PM

[] - Hoey - 12-01-2006, 08:23 AM

[] - NoHachi - 12-01-2006, 11:46 AM

[] - Hoey - 12-02-2006, 07:43 PM

[] - Hoey - 12-02-2006, 10:01 PM

[] - Hoey - 12-04-2006, 05:33 AM

[] - NoHachi - 12-04-2006, 11:50 AM

[] - Hoey - 12-04-2006, 05:25 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Correct connection brake master cylinder?	bozu	5	8,042	07-26-2015 12:28 PM Last Post: bozu
	4 Link setup and Traction brackets	Jezza_hr	5	11,123	07-21-2014 09:12 PM Last Post: Bean
	DIV 1 rally/track suspension setup	ditn	60	78,928	03-28-2013 11:28 PM Last Post: ditn
	Fuel system setup	86Pilot	2	5,178	01-30-2013 04:24 PM Last Post: Bean
	MSD 8980 setup - which wire does the dizzy connect to?	megabob	8	18,017	11-22-2011 07:02 PM Last Post: Project D

User(s) browsing this thread: 1 Guest(s)