what wheel size 13", 14", 15" use on hachi ?
07-25-2006, 09:09 PM
Post: #17
 
Well still dont understand what must be done if the outside must be widened or the inner of the fenders need some modify well i think i will better understand if i buy them :-) hope it will go well with 195/50 rubber because on our street is using less then 50 is killing of wheels ...really suck our roads. Too much holes.
If i see it right the 1 pic is with standard height and the red hachi has somethink like coilover setup

85' AE86 GT coupe lifetime project since 2005
Find all posts by this user


Messages In This Thread
[] - Bean - 07-24-2006, 02:22 PM
[] - ZaX - 07-24-2006, 04:32 PM
[] - Bean - 07-24-2006, 04:49 PM
[] - SekiguchiUeno - 07-24-2006, 06:17 PM
[] - ts@n@k@s - 07-24-2006, 06:32 PM
[] - Ryo - 07-24-2006, 09:04 PM
[] - oldskull - 07-24-2006, 10:21 PM
[] - nmwisima - 07-24-2006, 10:26 PM
[] - Kas - 07-24-2006, 11:36 PM
[] - Ivan141 - 07-25-2006, 07:27 AM
[] - nmwisima - 07-25-2006, 11:35 AM
[] - Bean - 07-25-2006, 11:49 AM
[] - Ryo - 07-25-2006, 05:00 PM
[] - nmwisima - 07-25-2006, 06:50 PM
[] - oldskull - 07-25-2006, 06:56 PM
[] - Ryo - 07-25-2006 09:09 PM
[] - oldskull - 07-25-2006, 09:51 PM
[] - Ryo - 07-26-2006, 08:27 AM
[] - Ivan141 - 07-26-2006, 08:59 AM
[] - nmwisima - 07-26-2006, 01:47 PM
[] - Ivan141 - 07-26-2006, 02:39 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Spare wheel & spare wheel carrier ondafly 6 669 01-19-2026 01:00 PM
Last Post: ondafly
  Shim size for AM cams kazi 4 6,871 12-18-2017 05:34 PM
Last Post: oldeskewltoy
Wink Hub size kazi 5 11,670 06-09-2017 10:06 PM
Last Post: kazi
  Camshaft sprocket bolt size? harkes 1 5,792 07-03-2015 12:41 PM
Last Post: Dave W
  Oil plug thread size is M18x1.5 ???? Dino86 5 11,377 06-07-2012 04:54 PM
Last Post: Dino86

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication