How do i fit a Oil Catch can to a 16v 4age??

[nmwisima]

Oil catch tank is pretty simple think to instal.

1. Find a good spot (that must be away from the exhaust manifold and extensive heat)

2. Mount it.

3. There is an oil hose going to your intake where the throttle is, find it and see where it goes (it goes on top of the engine)

4. Go and buy some more hose (meassure how much you need)

5. Connect the throttle outlet to one of the tanks inlets and from the engine outlet out the other tank inlet.

Thats it

Alternatively, you can close the engine outlet entirely, and put a small oil breath filter to the tank.