I bought a Hemi - Project Lit'lphant

[oldeskewltoy]

(05-25-2020 08:41 AM)chetverg Wrote:  The 1s flywheel sticks out 2mm more.
I didn't notice any differences in the teeth and diameter.
I'm from Russia, my English is bad.
I'll take a video of how it works on the engine

So... I've taken the ball and run with it.... I'm taking a $70 gamble......

So, I looked back at the info you gave me (SX70) and I did some research... the same flywheel is also used on the ST141, SA60 and SX60, along with a few others. Digging deeper I found a couple of part numbers.... (13405-69036, possibly also 13405-63010).

SOME of the cars listed also were 2S powered, not just 1S. It was then that it occured to me... the 1st gen Camry used a 2S engine here in the states. I did a quick search on Rockauto to see if they had a flywheel - they didn't, but they did have a ring gear... and its diameter (11.588"). If you remember, I measured the 5V @ 11.6. Finally, the 2S is a 6 bolt flywheel.... so I searched in a used parts database, found a few salvage yards that had them....


This one is my $70 "gamble" and it is on the way.....




more to come......