Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP

[mister86]

(02-07-2020 06:31 PM)Project D Wrote:  

(02-07-2020 05:59 PM)Ivan141 Wrote:  Theres only 1 guy that succesfully runs ITB's on an OEM ECU that I've heard of, and I believe he reprogrammed the ECU to trick it into doing something like alpha-N.
So never say never, but at the point where you can make the stock ECU your bitch you could probably make a healthy living off your skillset.

You can't reprogram the stock ECU, you have to remove the PROM and replace it with an EPROM or a daughter card and THEN program it to behave like you want.
But first you need to read the old memory and then reverse engineer the whole thing.
So like you said, at the point you are able to do that...

A MS clone like EFIgnition 46 doesn't cost much (certainly less than learning and reverse engineering the whole thing ) and is way better than any piggyback.
Of course you need to tune it, but that's like the FIRST rule when you modify an engine.

Mister86, what's your budget ?
What kind of mods do you want to do other than going ITB ? (alone, other than the throttle response, you are going to be pretty disappointed)

I really don’t have a budget, and can do anything. I just wanted a clean build with high quality parts, hence the Toda injection kit. I am rebuilding my motor right now, but am not upgrading cams, mild port job, headers, exhaust, things like that.