|
SOME 4AG valve spring specs
|
|
05-04-2015, 01:17 PM
(This post was last modified: 05-04-2015 01:33 PM by Project D.)
Post: #6
|
|||
|
|||
|
RE: SOME 4AG valve spring specs
Yes 14.4mm @ bind
And Supertech don't specify anything about maximum recommended valve lift. I guess mainly because they know that you can't go even close to 14.4mm on the 4AGE head. (The wildest camshafts on the market for the 4AGE 16v are all under 12mm) As a side note, the OEM springs are progressive while all the aftermarket (that I can think of at least) are linear. BTW, I'm surprised you reach coil bind @ almost 26mm (1.017") with the OEM spring. When I tested mine (on a vice) I was @ 25mm (0.985") |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
SOME 4AG valve spring specs - oldeskewltoy - 04-30-2015, 09:48 PM
RE: SOME 4AG valve spring specs - Bean - 05-01-2015, 09:47 PM
RE: SOME 4AG valve spring specs - oldeskewltoy - 05-02-2015, 01:10 AM
RE: SOME 4AG valve spring specs - Project D - 05-02-2015, 10:47 AM
RE: SOME 4AG valve spring specs - oldeskewltoy - 05-02-2015, 05:57 PM
RE: SOME 4AG valve spring specs - Project D - 05-04-2015 01:17 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 4A-GE valve shim disintegrated | DaLanZhu | 2 | 1,501 |
04-30-2025 12:54 PM Last Post: DaLanZhu |
|
| 4AGE Valve Buckets Scored | Steller Engineering | 2 | 1,780 |
10-06-2023 05:34 PM Last Post: Steller Engineering |
|
| 20 Valve Blacktop smoking after engine flush - why? | RolanTHUNDER | 2 | 2,751 |
11-30-2022 12:09 PM Last Post: RolanTHUNDER |
|
| Question about 4AG 20v Engine Block | CHACAMAN | 1 | 2,434 |
06-10-2022 05:17 PM Last Post: oldeskewltoy |
|
| HKS valve springs | totta Crolla | 3 | 3,367 |
05-25-2022 10:24 PM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)