|
DIY: Hopeless project.
|
|
07-22-2014, 09:31 PM
(This post was last modified: 07-23-2014 08:06 PM by Rascal21.)
Post: #56
|
|||
|
|||
 RE: DIY: Hopeless project.
Alright, 130lph it will be then
 Will use old inlet line for return, and lay a new 8mm pipe for new inlet. A little time-waster update on that: Ready: ![[Image: AEU86 AE86 - RE: DIY: Hopeless project.]](https://farm8.staticflickr.com/7327/13109073925_1ddf1b96f1_b.jpg "AEU86 AE86 - RE: DIY: Hopeless project.") Set: ![[Image: AEU86 AE86 - RE: DIY: Hopeless project.]](https://farm6.staticflickr.com/5582/14717080664_4eae057cfb_b.jpg "AEU86 AE86 - RE: DIY: Hopeless project.") Go: ![[Image: AEU86 AE86 - RE: DIY: Hopeless project.]](https://farm3.staticflickr.com/2923/14696471596_44281dffb2_b.jpg "AEU86 AE86 - RE: DIY: Hopeless project.") LOL: ![[Image: AEU86 AE86 - RE: DIY: Hopeless project.]](https://farm4.staticflickr.com/3882/14716298991_eb445b046c_b.jpg "AEU86 AE86 - RE: DIY: Hopeless project.") I`m guessing HG, valves and pistons/rods because theres oil leaking around the whole engine now and the sounds it made the last time it ran reminded me of a arctic steamer ship. It never ran right, valve-float at around 4000rpm somewhere. Heck it costed me almost 3x more to just keep that engine running for as long as it did (3 years) than to just swap to 16v right away, I had just changed oil (not some shit oil), new OEM oil filter, changed dynamo, starter, fuel filter, air filter etc etc, and it simply died despite my best efforts considering the alloted time and budget I had, so thats that. 1x AE86 84` Zenki Coupè Levin 4A-GE 20v 1x AE86 83' Zenki Coupe Levin 4A-GE 16v 1x TA60 82' Sedan 2T 8V 1x TA40 78` MK1 Zenk/Pre-Facelift Wagon 4A-GE 16v |
|||
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)