Effects of valve lift - worth it going higher?
03-15-2014, 12:41 AM
Post: #5
 
I just finished a head using 10mm lift with stock buckets and shims.... The cams are from Ted's they are their KK108E cams. I sent an email to them explaining that from what I always understood 9mm+ required something other then stock bucket/shim. They assured me that there KK108E cams work perfectly fine on stock buckets and shims... take that for what its worth....

[Image: AEU86 AE86 -  ]

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
[] - harkes - 01-27-2014, 11:15 AM
[] - totta Crolla - 01-27-2014, 11:59 AM
[] - jondee86 - 01-31-2014, 10:27 PM
[] - oldeskewltoy - 03-15-2014 12:41 AM
[] - totta Crolla - 03-15-2014, 12:08 PM
[] - harkes - 03-15-2014, 01:32 PM
[] - totta Crolla - 03-15-2014, 01:46 PM
[] - harkes - 03-15-2014, 02:05 PM
[] - totta Crolla - 03-15-2014, 02:20 PM
[] - Bean - 03-15-2014, 04:40 PM
[] - oldeskewltoy - 03-15-2014, 05:44 PM
[] - totta Crolla - 03-15-2014, 07:59 PM
[] - totta Crolla - 03-15-2014, 08:09 PM
[] - oldeskewltoy - 03-15-2014, 11:20 PM
[] - harkes - 03-17-2014, 07:47 AM
[] - Bean - 03-17-2014, 09:12 AM
[] - oldeskewltoy - 03-17-2014, 09:21 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  4A-GE valve shim disintegrated DaLanZhu 2 787 04-30-2025 12:54 PM
Last Post: DaLanZhu
  4AGE Valve Buckets Scored Steller Engineering 2 1,427 10-06-2023 05:34 PM
Last Post: Steller Engineering
  20 Valve Blacktop smoking after engine flush - why? RolanTHUNDER 2 2,175 11-30-2022 12:09 PM
Last Post: RolanTHUNDER
  HKS valve springs totta Crolla 3 2,922 05-25-2022 10:24 PM
Last Post: oldeskewltoy
  Valve clearance leon205gti 7 9,526 11-25-2016 03:24 AM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication