Cams doubt

Threaded Mode | Linear Mode

Cams doubt

02-08-2013, 05:42 PM

Post: #39

T_AE86 Offline

Member

Posts: 183
Joined: Dec 2009
Reputation: 0

Thanks, i'm learning many things, two options are nice, in general i see it:

16v:

? With a "custom 16v", one of my fears is the reliability (i don't want 200hp) i think about 150 would be good...i don't know if the engine will break in 20.000km.

+ my stock?: I have in the garage one bigport 7 rib and one bigport 3 rib, as I have learned here Respect!

i would take the 3 rib

+ i don't have to homologate this engine customize

20v

+ Will be a stock engine, it give me more trust with reliability

- I don't have parts of 20 in my garage

- I'll have to homologate this engine

Other option?? ....Is so difficult to made an 7AGE?? Confused

(i didn't think it)
I think is not so easy like "mount one stock 4a head in a stock 7afe block" and runs a lot...to make it runs must do more than cams (usable at med rpm too) and HC pistons??

Sorry for this headache mates!!

« Next Oldest | Next Newest »

Messages In This Thread

Cams doubt.......(and blocks....and BT doubts...) - T_AE86 - 07-09-2011, 04:59 PM

[] - Project D - 07-09-2011, 08:16 PM

[] - T_AE86 - 01-30-2013, 06:31 PM

[] - oldeskewltoy - 01-30-2013, 07:59 PM

[] - T_AE86 - 01-30-2013, 09:20 PM

[] - oldeskewltoy - 01-31-2013, 05:51 AM

[] - Project D - 01-31-2013, 01:14 PM

[] - Alex170984 - 01-31-2013, 03:23 PM

[] - oldeskewltoy - 01-31-2013, 08:57 PM

[] - T_AE86 - 02-01-2013, 12:06 AM

[] - oldeskewltoy - 02-01-2013, 12:33 AM

[] - Alex170984 - 02-01-2013, 03:53 PM

[] - NoHachi - 02-01-2013, 04:54 PM

[] - Bean - 02-02-2013, 04:03 PM

[] - T_AE86 - 02-05-2013, 12:50 AM

[] - Uzelac - 02-05-2013, 01:09 AM

[] - Bean - 02-05-2013, 08:56 AM

[] - Vaptor - 02-05-2013, 09:32 AM

[] - Bean - 02-05-2013, 11:38 AM

[] - Vaptor - 02-05-2013, 12:06 PM

[] - oldeskewltoy - 02-05-2013, 08:36 PM

[] - oldeskewltoy - 02-05-2013, 08:50 PM

[] - Uzelac - 02-05-2013, 11:08 PM

[] - ditn - 02-05-2013, 11:13 PM

[] - Uzelac - 02-06-2013, 02:50 AM

[] - T_AE86 - 02-07-2013, 12:34 AM

[] - Bean - 02-07-2013, 01:04 AM

[] - fax0815 - 02-07-2013, 01:18 AM

[] - Jan Pedersen - 02-07-2013, 08:17 AM

[] - Jan Pedersen - 02-07-2013, 08:19 AM

[] - T_AE86 - 02-07-2013, 10:09 AM

[] - 4000GT - 02-07-2013, 10:20 AM

[] - T_AE86 - 02-07-2013, 10:35 AM

[] - NoHachi - 02-07-2013, 11:18 AM

[] - Uzelac - 02-07-2013, 12:44 PM

[] - oldeskewltoy - 02-07-2013, 07:34 PM

[] - Bean - 02-07-2013, 07:36 PM

[] - Jan Pedersen - 02-07-2013, 10:32 PM

[] - T_AE86 - 02-08-2013 05:42 PM

[] - Bean - 02-08-2013, 06:30 PM

[] - Jan Pedersen - 02-08-2013, 09:57 PM

[] - T_AE86 - 02-09-2013, 12:26 AM

[] - Bean - 02-09-2013, 11:55 AM

[] - T_AE86 - 02-09-2013, 02:21 PM

[] - Bean - 02-09-2013, 04:06 PM

[] - T_AE86 - 02-12-2013, 12:24 PM

[] - Bean - 02-12-2013, 01:45 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Shim size for AM cams	kazi	4	5,891	12-18-2017 05:34 PM Last Post: oldeskewltoy
	Toda Cams	Alex170984	7	9,631	02-11-2017 05:50 PM Last Post: Alex170984
	20V cams - CATCAMS vs KELFORD?	Grant	19	41,190	11-19-2015 07:45 AM Last Post: hachirokkos
	cams cams cams	megabob	60	62,532	12-31-2013 01:19 AM Last Post: gze spec
	part numbers on standard cams	Alex170984	10	12,138	09-19-2013 02:53 PM Last Post: pack

User(s) browsing this thread: 2 Guest(s)