Cams doubt

Threaded Mode | Linear Mode

Cams doubt

02-01-2013, 04:54 PM

Post: #13

NoHachi Offline

Super Moderator

Posts: 2,902
Joined: Sep 2004
Reputation: 0

Be carefull comparing wheelhp outputs, there are so many variables between dyno's that the numbers can be off by as much as 10%, some are worse then that (e.g. when calling hub numbers hp@the wheels).

You would expect hp to scale at most with the increase in displacement. Going from 81 to 81.5 should yield about 1whp at most due to displacement. If its more then something else changed too.

A wheel to steer the front of the car
A pedal to steer the rear

« Next Oldest | Next Newest »

Messages In This Thread

Cams doubt.......(and blocks....and BT doubts...) - T_AE86 - 07-09-2011, 04:59 PM

[] - Project D - 07-09-2011, 08:16 PM

[] - T_AE86 - 01-30-2013, 06:31 PM

[] - oldeskewltoy - 01-30-2013, 07:59 PM

[] - T_AE86 - 01-30-2013, 09:20 PM

[] - oldeskewltoy - 01-31-2013, 05:51 AM

[] - Project D - 01-31-2013, 01:14 PM

[] - Alex170984 - 01-31-2013, 03:23 PM

[] - oldeskewltoy - 01-31-2013, 08:57 PM

[] - T_AE86 - 02-01-2013, 12:06 AM

[] - oldeskewltoy - 02-01-2013, 12:33 AM

[] - Alex170984 - 02-01-2013, 03:53 PM

[] - NoHachi - 02-01-2013 04:54 PM

[] - Bean - 02-02-2013, 04:03 PM

[] - T_AE86 - 02-05-2013, 12:50 AM

[] - Uzelac - 02-05-2013, 01:09 AM

[] - Bean - 02-05-2013, 08:56 AM

[] - Vaptor - 02-05-2013, 09:32 AM

[] - Bean - 02-05-2013, 11:38 AM

[] - Vaptor - 02-05-2013, 12:06 PM

[] - oldeskewltoy - 02-05-2013, 08:36 PM

[] - oldeskewltoy - 02-05-2013, 08:50 PM

[] - Uzelac - 02-05-2013, 11:08 PM

[] - ditn - 02-05-2013, 11:13 PM

[] - Uzelac - 02-06-2013, 02:50 AM

[] - T_AE86 - 02-07-2013, 12:34 AM

[] - Bean - 02-07-2013, 01:04 AM

[] - fax0815 - 02-07-2013, 01:18 AM

[] - Jan Pedersen - 02-07-2013, 08:17 AM

[] - Jan Pedersen - 02-07-2013, 08:19 AM

[] - T_AE86 - 02-07-2013, 10:09 AM

[] - 4000GT - 02-07-2013, 10:20 AM

[] - T_AE86 - 02-07-2013, 10:35 AM

[] - NoHachi - 02-07-2013, 11:18 AM

[] - Uzelac - 02-07-2013, 12:44 PM

[] - oldeskewltoy - 02-07-2013, 07:34 PM

[] - Bean - 02-07-2013, 07:36 PM

[] - Jan Pedersen - 02-07-2013, 10:32 PM

[] - T_AE86 - 02-08-2013, 05:42 PM

[] - Bean - 02-08-2013, 06:30 PM

[] - Jan Pedersen - 02-08-2013, 09:57 PM

[] - T_AE86 - 02-09-2013, 12:26 AM

[] - Bean - 02-09-2013, 11:55 AM

[] - T_AE86 - 02-09-2013, 02:21 PM

[] - Bean - 02-09-2013, 04:06 PM

[] - T_AE86 - 02-12-2013, 12:24 PM

[] - Bean - 02-12-2013, 01:45 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Shim size for AM cams	kazi	4	6,388	12-18-2017 05:34 PM Last Post: oldeskewltoy
	Toda Cams	Alex170984	7	10,218	02-11-2017 05:50 PM Last Post: Alex170984
	20V cams - CATCAMS vs KELFORD?	Grant	19	42,874	11-19-2015 07:45 AM Last Post: hachirokkos
	cams cams cams	megabob	60	65,992	12-31-2013 01:19 AM Last Post: gze spec
	part numbers on standard cams	Alex170984	10	12,901	09-19-2013 02:53 PM Last Post: pack

User(s) browsing this thread: 1 Guest(s)