4A-GE engine mix - question

Threaded Mode | Linear Mode

4A-GE engine mix - question

03-07-2012, 11:31 AM

Post: #67

Uzelac Offline

Posting Freak

Posts: 951
Joined: May 2008
Reputation: 0

Work in progress, still.... having hard time gaining volume in chamber.
ATM it is 32cc.
Valves are sinked 0.5mm with 3 angle job.
Piston dome is 5.9cc, gasket is 83mm/1mm. Squish would be .8mm

Static CR is ~13:1 by our calculation.

Race fuels and similar stuff is not on wanted list.
Trying to find few more cc and lower it to ~12:1.

« Next Oldest | Next Newest »

Messages In This Thread

4A-GE engine mix - question - Maren - 11-26-2010, 03:55 PM

[] - Ivan141 - 11-26-2010, 06:55 PM

[] - Maren - 11-26-2010, 07:40 PM

[] - oldeskewltoy - 11-26-2010, 07:42 PM

[] - Uzelac - 03-04-2011, 08:10 PM

[] - oldeskewltoy - 03-05-2011, 08:50 AM

[] - Uzelac - 03-05-2011, 02:54 PM

[] - oldeskewltoy - 03-08-2011, 07:56 PM

[] - Uzelac - 03-09-2011, 01:55 AM

[] - oldeskewltoy - 03-09-2011, 02:05 AM

[] - Uzelac - 03-09-2011, 03:55 AM

[] - Project D - 03-09-2011, 02:26 PM

[] - Uzelac - 03-09-2011, 03:04 PM

[] - oldeskewltoy - 03-09-2011, 07:29 PM

[] - Uzelac - 03-10-2011, 02:33 AM

[] - oldeskewltoy - 03-10-2011, 03:59 AM

[] - Bean - 03-10-2011, 09:51 AM

[] - Project D - 03-10-2011, 12:22 PM

[] - Uzelac - 03-10-2011, 01:13 PM

[] - Nomuken - 03-10-2011, 01:56 PM

[] - Uzelac - 03-10-2011, 02:48 PM

[] - Project D - 03-10-2011, 03:45 PM

[] - Uzelac - 03-10-2011, 04:57 PM

[] - Bean - 03-10-2011, 05:41 PM

[] - Uzelac - 03-10-2011, 05:50 PM

[] - Project D - 03-10-2011, 05:57 PM

[] - Bean - 03-10-2011, 05:58 PM

[] - oldeskewltoy - 03-11-2011, 04:34 AM

[] - Uzelac - 03-19-2011, 01:48 PM

[] - oldeskewltoy - 03-20-2011, 05:04 AM

[] - Uzelac - 03-20-2011, 10:26 AM

[] - Uzelac - 11-02-2011, 12:29 AM

[] - Bean - 11-02-2011, 08:43 AM

[] - Uzelac - 11-02-2011, 10:35 AM

[] - Uzelac - 11-02-2011, 10:44 AM

[] - Bean - 11-02-2011, 12:02 PM

[] - NoHachi - 11-02-2011, 12:25 PM

[] - Uzelac - 11-02-2011, 12:40 PM

[] - Bean - 11-03-2011, 06:39 AM

[] - Uzelac - 11-03-2011, 11:41 AM

[] - Bean - 11-03-2011, 11:53 AM

[] - Uzelac - 11-03-2011, 12:36 PM

[] - NoHachi - 11-03-2011, 12:44 PM

[] - Uzelac - 11-03-2011, 02:37 PM

[] - Bean - 11-03-2011, 02:40 PM

[] - Uzelac - 11-03-2011, 03:03 PM

[] - Project D - 11-03-2011, 03:18 PM

[] - Uzelac - 11-03-2011, 03:51 PM

[] - NoHachi - 11-03-2011, 03:54 PM

[] - Bean - 11-03-2011, 03:56 PM

[] - Uzelac - 11-03-2011, 04:08 PM

[] - Uzelac - 11-03-2011, 04:11 PM

[] - Project D - 11-03-2011, 04:11 PM

[] - Uzelac - 11-03-2011, 04:15 PM

[] - NoHachi - 11-03-2011, 04:20 PM

[] - Project D - 11-03-2011, 04:23 PM

[] - oldeskewltoy - 11-04-2011, 07:28 PM

[] - NoHachi - 11-04-2011, 08:27 PM

[] - oldeskewltoy - 11-04-2011, 09:38 PM

[] - Uzelac - 11-05-2011, 12:48 AM

[] - Uzelac - 12-05-2011, 01:15 PM

[] - NoHachi - 12-05-2011, 05:21 PM

[] - Uzelac - 12-06-2011, 02:46 PM

[] - Uzelac - 01-14-2012, 03:08 AM

[] - totta Crolla - 01-14-2012, 11:50 AM

[] - Uzelac - 01-17-2012, 05:10 PM

[] - Uzelac - 03-07-2012 11:31 AM

[] - Bean - 03-07-2012, 11:36 AM

[] - Uzelac - 03-07-2012, 12:08 PM

[] - Bean - 03-07-2012, 12:23 PM

[] - Uzelac - 03-07-2012, 12:36 PM

[] - oldeskewltoy - 03-08-2012, 04:13 AM

[] - Bean - 03-08-2012, 12:35 PM

[] - Uzelac - 03-08-2012, 01:01 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Question about 4AG 20v Engine Block	CHACAMAN	1	2,508	06-10-2022 05:17 PM Last Post: oldeskewltoy
	Bluetop Engine Rebuild multiple question Goal 150-160hp	Hanzo	16	13,138	04-19-2021 10:08 PM Last Post: Hanzo
	toyota a series engine....can a fwd corolla engine be used	210 datsun guy	5	9,538	10-30-2013 11:18 PM Last Post: banpei
	RE: mix and match the 4AGE..	panda_tureno86	4	5,885	01-18-2012 08:20 PM Last Post: panda_tureno86
	Engine question.	caper	24	26,021	07-25-2010 07:04 PM Last Post: caper

User(s) browsing this thread: 1 Guest(s)