Questions about brake boosters and master cylinders---SOLVED

[T_AE86]

Thanks mates!!!

Bean Bandit Wrote:what bolt pattern do you have as there are different ones?

My car is mounting zenki 2 bolts (pic below) i have an old kouki in the garage, but i don't know if it would also be small

Project D Wrote:If you have the standard horizontal 2 bolts BMC-> many nissan (like the R32 GTS) , many toyota 4X4 (landcrusier) some Mitsubishi...

By the way it would be cool to make a complete list of BMC that can be used depending on the booster
(On AE86 we have 3 different types: 2 bolts straight, 2 bolts inclined, 4 bolts)
and the bore size of each

Looking the car is an horizontal 2 bolts BMC, not? (look the pics below)...then, a R32 GTS will fit in my brake booster, not? (I understand that i have to get only the R32 BMC... whitout R32 booster?)

Eircamae86 Wrote:As above R32 non-abs will work + some Hilux options.
The R32 is front is a 3 line type, Front left/right & rear

3 lines?...Then, should i make a new tube instalation or connect L+R in the original "front tubes"??

NoHachi Wrote:What Wilwoods are you running?

Wilwood forged Dynalite

PatrickAE86 Wrote:zenki is 2 bolt and kouki 4 bolt

All right, 2 horizontal zenki, but 2 bolts inclined...i don't know


Then, do you know what chassis-year of Hilux, LandCruisers will fit in the 2 horizontal bolts booster?? what size are? would i have to modify the tubes instalation? bigger than R32? (i would preffer a Toyota BMC than Nissan because the R32 never sold here and the Gran Canaria Nissan distributor work very poorly and too expensive, and we have a lot of Hilux and LandCruisers here, and is so easy to buy a repair kit, etc, but if R32 is much better, i'll buy it with his repair kit by internet)

Thanks mates