stock ignition for 4AGE 16v

[Uzelac]

Hi

Does anybody have stock 4AGE ignition map table ?
If not, what are the known parameters?

AFAIK, stock ignitnon at idle should be put to 10, and it advances to maximum 30-40 BTDC after 3000 or 4000rpm.

Is it fixed above 3000/4000 rpm ?
Is it changed depending on sudden change in TPS/MAP/MAF ?

This is something i used last year when i had Honda PGM-FI ECU on my 4AGE.


Left is TPS, above are RPMs

Disclaimer 1: Crome is known to have some issues with ignition mapping, so if anything doesn't make sense, Crome could be an issue.
Disclaimer 2: I have pretty big problems with fuel and CR, also last year. That's the reason i run pretty retarder.

Nevertheless, i need good starting point for building new ignition map.
I found some maps online, but i would like to see stock first.
Could anyone help building stock map ?

Thanks